We recommend running one major version (2.x or 3.x) of a Data Plane node per Control Plane, unless you are in the middle of version upgrades to the Data Plane.
If you mix major Data Plane node versions, the Control Plane will support the least common subset of configurations across all the versions connected to the Konnect Control Plane. For example, if you are running 2.8.1.3 on one Data Plane node and 3.0.0.0 on another, the Control Plane will only push configurations that can be used by the 2.8.1.3 Data Plane node.
If you experience compatibility errors, upgrade your Data Plane nodes to match the version of the highest-versioned Data Plane node in your Control Plane.
The following table defines the possible compatibility errors with Konnect Data Plane nodes:
|
Error code |
Severity |
Description |
Resolution |
References |
|---|---|---|---|---|
| D100 | warning |
Plugin jq is not available in Kong Gateway versions < 2.6.0.0.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
jq plugin |
| D101 | warning |
For the canary plugin, one or more of the following config fields are set: hash_header but Kong Gateway versions < 2.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
Canary plugin |
| D102 | warning |
For the canary plugin, config.hash field has been set to header. This is not supported in Kong Gateway versions < 2.6.0.0. The plugin configuration has been changed to config.hash=consumer in the data plane node.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
Canary plugin |
| D103 | warning |
For the kafka-log plugin, one or more of the following config fields are set: authentication, keepalive_enabled, security but Kong Gateway versions < 2.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
Kafka Log plugin |
| D104 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: authentication, keepalive_enabled, security but Kong Gateway versions < 2.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
Kafka Upstream plugin |
| D105 | warning |
For the rate-limiting-advanced plugin, either config.strategy is set to local or config.identifier is set to path or both. These settings are not supported in Kong Gateway versions < 2.6.0.0. In the data plane node, the plugin configuration has one or more of the following changes: (a) config.strategy has been updated to redis, (b) config.sync_rate has been updated to 1, (c) config.identifier has been updated to consumer`.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
Rate Limiting Advanced plugin |
| D106 | warning |
For the openid-connect plugin, one or more of the following unsupported config fields or values for a config field are in use: by_username_ignore_case, disable_session, downstream_introspection_jwt_header, downstream_user_info_jwt_header, introspection_accept, introspection_check_active, upstream_introspection_jwt_header, upstream_user_info_jwt_header, userinfo_accept, userinfo_headers_client, userinfo_headers_names, userinfo_headers_values, userinfo_query_args_client, userinfo_query_args_names, userinfo_query_args_values, auth_methods array field with value userinfo, ignore_signature array field with value introspection, ignore_signature array field with value userinfo, login_methods array field with value userinfo, token_headers_grants array field with value refresh_token.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
OpenID Connect plugin |
| D107 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: path but Kong Gateway versions < 2.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
Rate Limiting Advanced plugin |
| D108 | warning |
For the forward-proxy plugin, one or more of the following config fields are set: auth_username, auth_password but Kong Gateway versions < 2.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Forward Proxy plugin |
| D109 | warning |
For the mocking plugin, one or more of the following config fields are set: random_examples but Kong Gateway versions < 2.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Mocking plugin |
| D110 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: enforce_consumer_groups, consumer_groups but Kong Gateway versions < 2.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Rate Limiting Advanced plugin |
| D111 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: redis.username, redis.sentinel_username but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Rate Limiting Advanced plugin |
| D112 | warning |
For the proxy-cache-advanced plugin, one or more of the following config fields are set: redis.username, redis.sentinel_username but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Proxy Cache Advanced plugin |
| D113 | warning |
For the canary plugin, one or more of the following config fields are set: canary_by_header_name but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Canary plugin |
| D114 | warning |
For the forward-proxy plugin, one or more of the following config fields are set: https_proxy_host, https_proxy_port but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Forward Proxy plugin |
| D115 | warning | N/A | N/A | Forward Proxy plugin |
| D116 | warning |
For the openid-connect plugin, one or more of the following config fields are set: session_redis_username, resolve_distributed_claims but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
OpenID Connect plugin |
| D117 | warning | N/A | N/A | OpenID Connect plugin |
| D118 | warning |
For the kafka-log plugin, one or more of the following config fields are set: cluster_name but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Kafka Log plugin |
| D119 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: cluster_name but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Kafka Upstream plugin |
| D120 | warning |
For the kafka-log plugin, one or more of the following fields: authentication.mechanism have been set to one or more of the following values: SCRAM-SHA-512 but Kong Gateway versions < 2.8.1.1 do not support these values. Impacted fields have been updated to the following values in the data plane node: SCRAM-SHA-256. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 2.8.1.1 or above.
|
Kafka Log plugin |
| D121 | warning |
For the kafka-upstream plugin, one or more of the following fields: authentication.mechanism have been set to one or more of the following values: SCRAM-SHA-512 but Kong Gateway versions < 2.8.1.1 do not support these values. Impacted fields have been updated to the following values in the data plane node: SCRAM-SHA-256. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 2.8.1.1 or above.
|
Kafka Upstream plugin |
| D122 | warning |
For the mtls-auth plugin, one or more of the following config fields are set: http_proxy_host, http_proxy_port, https_proxy_host, https_proxy_port but Kong Gateway versions < 2.8.1.1 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.1.1 or above.
|
mTLS Authentication plugin |
| D123 | warning |
It seems you are using Konnect Developer Portal with Kong Gateway. For the Developer Portal’s application registration feature to work correctly, konnect-application-auth plugin is required but this plugin is not available on Kong Gateway versions < 3.0.0.0 The feature is not working as intended and can cause severe security issues including authentication and authorization not being enforced in the Gateway.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
N/A |
| D124 | warning |
For the ldap-auth-advanced plugin, one or more of the following config fields are set: groups_required but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
LDAP Authentication Advanced plugin |
| D125 | warning |
For the opa plugin, one or more of the following config fields are set: include_body_in_opa_input, include_parsed_json_body_in_opa_input, ssl_verify but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
OPA plugin |
| D126 | warning |
For the statsd-advanced plugin, one or more of the following config fields are set: consumer_identifier_default, service_identifier_default, workspace_identifier_default but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
N/A |
| D127 | warning |
For the rate-limiting-advanced plugin, config.sync_rate was set to a float value less than 1.0. This configuration is not supported in Kong Gateway versions < 2.6.0.0. The configuration has been changed with config.sync_rate set to value of 1.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
Rate Limiting Advanced plugin |
| D128 | warning |
For the openid-connect plugin, config.anonymous field has been set to a string value that is not a UUID, possibly to reference a consumer via username. This feature is not supported in Kong Gateway versions < 3.0.0.0. The plugin configuration has been changed to remove the config.anonymous field.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
OpenID Connect plugin |
| D129 | error | Konnect cloud’s Developer Portal’s application registration workflow requires features introduced in Kong Gateway 3.0.0.0. Some features of the Developer Portal are not working as intended. |
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
N/A |
| D130 | warning |
For the Plugin entity, the ordering field has been set but Kong Gateway versions < 3.0 do not support plugin re-ordering. The ordering field has been removed from the configuration; plugins are executing based on the priorities coded into plugins.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Plugins entity |
| D131 | error |
For the service entity, protocol field has been set to ws or wss. This is not supported in Kong Gateway versions < 3.0.0.0. The service and all associated route(s) and plugin(s) have been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Services entity |
| D132 | error |
For the route entity or associated service, protocol field has been set to ws or wss. This is not supported in Kong Gateway versions < 3.0.0.0. The route and all associated plugin(s) have been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Routes entity |
| D133 | error |
For the plugin entity, protocol field has been set to ws or wss. This is not supported in Kong Gateway versions < 3.0.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Plugins entity |
| D134 | warning |
Plugin websocket-validator is not available in Kong Gateway versions < 3.0.0.0.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Websocket Validator plugin |
| D135 | warning |
Plugin websocket-size-limit is not available in Kong Gateway versions < 3.0.0.0.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Websocket Size Limit plugin |
| D136 | warning |
Plugin tls-handshake-modifier is not available in Kong Gateway versions < 3.0.0.0.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
TLS Handshake Modifier plugin |
| D137 | warning |
Plugin tls-metadata-headers is not available in Kong Gateway versions < 3.0.0.0.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
TLS Metadata Headers plugin |
| D138 | warning |
For the forward-proxy plugin, one or more of the following config fields are set: x_headers but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Forward Proxy plugin |
| D139 | warning |
For the mtls-auth plugin, one or more of the following config fields are set: send_ca_dn but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
mTLS Authentication plugin |
| D140 | warning |
For the route-transformer-advanced plugin config.escape_path is set. This is not supported in Kong Gateway versions < 2.8.2.0 and in Kong Gateway versions > 3.0.x.x. Plugin features that rely on this field are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.2.0 or above, excluding versions 3.0.0.x and 3.0.1.x
|
Route Transformer Advanced plugin |
| D141 | warning |
Plugin app-dynamics is not available in Kong Gateway versions < 3.1.0.0.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
App Dynamics plugin |
| D142 | warning |
Plugin saml is not available in Kong Gateway versions < 3.1.0.0.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
SAML plugin |
| D143 | warning |
Plugin jwe-decrypt is not available in Kong Gateway versions < 3.1.0.0.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Kong JWE Decrypt plugin |
| D144 | warning |
Plugin xml-threat-protection is not available in Kong Gateway versions < 3.1.0.0.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
XML Threat Protection plugin |
| D145 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: error_code, error_message, disable_penalty but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Rate Limiting Advanced plugin |
| D146 | warning |
For the vaults entity, one or more of the following schema fields are set: auth_method, kube_role, kube_api_token_file but Kong Gateway versions < 3.1.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Vaults entity |
| D147 | warning |
The consumer_group entity is being used, but Kong Gateway versions < 2.8.0.0 do not support this entity.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Consumer Groups entity |
| D148 | warning |
As part of the Consumer Groups feature, some Consumers have been set to belong to one or more of such groups but Kong Gateway versions < 2.8 do not support Consumer Groups. The group membership for consumers has been removed from the configuration.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Consumer Groups entity |
| D149 | warning |
As part of the Consumer Groups feature, some Rate Limiting Advanced overrides have been to one of such groups but Kong Gateway versions < 2.8 do not support Consumer Groups. These overrides have been removed from the configuration; Rate Limiting policies are governed by global configuration.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Consumer Groups entity |
| D150 | warning |
For the mocking plugin, one or more of the following config fields are set: included_status_codes, random_status_code but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Mocking plugin |
| D151 | warning |
For the oauth2-introspection plugin, config.anonymous field has been set to a string value that is not a UUID, possibly to reference a consumer via username. This feature is not supported in Kong Gateway versions < 3.1.0.0. The plugin configuration has been changed to remove the config.anonymous field.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
OAuth 2.0 Introspection plugin |
| D152 | warning |
For the mtls-auth plugin, config.anonymous field has been set to a string value that is not a UUID, possibly to reference a consumer via username. This feature is not supported in Kong Gateway versions < 3.1.0.0. The plugin configuration has been changed to remove the config.anonymous field.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
mTLS Authentication plugin |
| D153 | warning |
For the ldap-auth-advanced plugin, config.anonymous field has been set to a string value that is not a UUID, possibly to reference a consumer via username. This feature is not supported in Kong Gateway versions < 3.1.0.0. The plugin configuration has been changed to remove the config.anonymous field.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
LDAP Authentication Advanced plugin |
| D154 | warning |
For the request-transformer-advanced plugin, one or more of the following config fields are set: dots_in_keys, replace.json_types, append.json_types, add.json_types but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Request Transformer Advanced plugin |
| D156 | warning |
For the openid-connect plugin, config.authorization_cookie_same_site has been set to Default. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin configuration has been changed to config.authorization_cookie_same_site=Lax in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
OpenID Connect plugin |
| D157 | warning |
For the openid-connect plugin, config.session_cookie_same_site has been set to Default. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin configuration has been changed to the config.session_cookie_same_site=Lax in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
OpenID Connect plugin |
| D158 | warning |
For the openid-connect plugin, one or more config fields are set but Kong Gateway versions < 3.2.0.0 do not support these fields. The plugin configuration has been updated and these fields have been mapped to their old names: session_memcached_port => session_memcache_port, authorization_cookie_http_only => authorization_cookie_httponly, session_rolling_timeout => session_cookie_lifetime, session_cookie_same_site => session_cookie_samesite, session_memcached_prefix => session_memcache_prefix, session_memcached_socket => session_memcache_socket, session_memcached_host => session_memcache_host, authorization_rolling_timeout => authorization_cookie_lifetime, authorization_cookie_same_site => authorization_cookie_samesite, session_idling_timeout => session_cookie_idletime, session_cookie_http_only => session_cookie_httponly, session_redis_cluster_max_redirections => session_redis_cluster_maxredirections
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
OpenID Connect plugin |
| D159 | warning |
For the openid-connect plugin, one or more of the following config fields are set: session_audience, session_remember, session_remember_cookie_name, session_remember_rolling_timeout, session_remember_absolute_timeout, session_absolute_timeout, session_store_metadata, session_response_headers, session_request_headers, session_enforce_same_subject, session_hash_subject, session_hash_storage_key but Kong Gateway versions < 3.2.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
OpenID Connect plugin |
| D160 | warning |
For the openid-connect plugin, one or more of the following config fields are set: session_cookie_renew, session_cookie_maxsize, session_strategy, session_compressor but Kong Gateway versions >= 3.2.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please remove these fields from the plugin configuration. | OpenID Connect plugin |
| D161 | warning |
For the openid-connect plugin, config.session_storage field has been set to memcached. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin configuration has been changed to config.session_storage=memcache in the data plane node.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
OpenID Connect plugin |
| D162 | warning |
For the saml plugin, one or more of the following config fields are set: session_audience, session_remember, session_remember_cookie_name, session_remember_rolling_timeout, session_remember_absolute_timeout, session_store_metadata, session_response_headers, session_request_headers, session_enforce_same_subject, session_hash_subject, session_hash_storage_key but Kong Gateway versions < 3.2.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
SAML plugin |
| D163 | warning |
For the saml plugin, one or more config fields are set but Kong Gateway versions < 3.2.0.0 do not support these fields. The plugin configuration has been updated and these fields have been mapped to their old names: session_rolling_timeout => session_cookie_lifetime, session_cookie_http_only => session_cookie_httponly, session_memcached_prefix => session_memcache_prefix, session_redis_cluster_max_redirections => session_redis_cluster_maxredirections, session_idling_timeout => session_cookie_idletime, session_cookie_same_site => session_cookie_samesite, session_memcached_socket => session_memcache_socket, session_memcached_host => session_memcache_host, session_memcached_port => session_memcache_port
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
SAML plugin |
| D164 | warning |
For the saml plugin, one or more of the following config fields are set: session_cookie_renew, session_auth_ttl, session_cookie_maxsize, session_strategy, session_compressor but Kong Gateway versions >= 3.2.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please remove these fields from the plugin configuration. | SAML plugin |
| D165 | warning |
For the saml plugin, config.session_storage field has been set to memcached. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin configuration has been changed to config.session_storage=memcache in the data plane node.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
SAML plugin |
| D166 | warning |
For the saml plugin, config.session_cookie_same_site has been set to Default. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin configuration has been changed to config.session_cookie_same_site=Lax in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
SAML plugin |
| D167 | warning |
For the app-dynamics plugin, instances have been configured on a specific consumer. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin has been removed in the data plane node.
|
Unset the consumer fields for the plugin, or upgrade Kong Gateway to a version >= 3.2.0.0.
|
App Dynamics plugin |
| D168 | warning |
Plugin oas-validation is not available in Kong Gateway versions < 3.1.0.0.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
OAS Validation plugin |
| D169 | error |
For the service entity, one of tls_verify, tls_verify_depth, ca_certificates or client_certificate fields has been set with protocol set to TLS. This is not supported in Kong Gateway versions < 3.2.0.0. These fields have been removed from the service configuration in the data plane node and the service has been disabled.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Services entity |
| D170 | warning |
For the rate-limiting-advanced plugin, config.strategy field has been set to cluster. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin configuration has been changed to config.strategy=local and sync_rate=null in the data plane node and might not work as intended.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Rate Limiting Advanced plugin |
| D171 | warning |
For the service entity, one of tls_verify, tls_verify_depth, ca_certificates or client_certificate fields has been set with protocol set to TLS. This is not supported in Kong Gateway versions < 3.2.0.0. These services and the associated plugins and routes have been removed from the configuration in the data plane node.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Services entity |
| D172 | warning |
For the opa plugin, one or more of the following config fields are set: include_uri_captures_in_opa_input but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
OPA plugin |
| D173 | warning |
For the degraphql plugin, one or more of the following config fields are set: graphql_server_path but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
DeGraphQL plugin |
| D174 | warning | The degraphql plugin has been disabled because of known issues on Kong Gateway < 3.0.0.0. |
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
DeGraphQL plugin |
| D175 | warning | The deGraphQL Route entities have been removed because of known issues with Kong Gateway < 3.0.0.0. |
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
DeGraphQL plugin |
| D176 | warning |
For the jwt-signer plugin, one or more of the following config fields are set: add_claims, set_claims but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
JWT Signer plugin |
| D177 | warning |
For the proxy-cache-advanced plugin, one or more of the following config fields are set: ignore_uri_case but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
Proxy Cache Advanced plugin |
| D178 | warning |
For the rate-limiting-advanced plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.4.0.0. The plugin has been removed in the data plane node.
|
Unset the consumer_group fields for the plugin, or upgrade Kong Gateway to a version >= 3.4.0.0.
|
Rate Limiting Advanced plugin |
| D179 | warning |
For the request-transformer-advanced plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.4.0.0. The plugin has been removed in the data plane node.
|
Unset the consumer_group fields for the plugin, or upgrade Kong Gateway to a version >= 3.4.0.0.
|
Request Transformer Advanced plugin |
| D180 | warning |
For the response-transformer-advanced plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.4.0.0. The plugin has been removed in the data plane node.
|
Unset the consumer_group fields for the plugin, or upgrade Kong Gateway to a version >= 3.4.0.0.
|
Response Transformer Advanced plugin |
| D181 | warning |
For the request-transformer plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.4.0.0. The plugin has been removed in the data plane node.
|
Unset the consumer_group fields for the plugin, or upgrade Kong Gateway to a version >= 3.4.0.0.
|
Request Transformer plugin |
| D182 | warning |
For the response-transformer plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.4.0.0. The plugin has been removed in the data plane node.
|
Unset the consumer_group fields for the plugin, or upgrade Kong Gateway to a version >= 3.4.0.0.
|
Response Transformer plugin |
| D183 | warning |
For the openid-connect plugin, one or more of the following config fields are set: expose_error_code but Kong Gateway versions < 3.4.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
OpenID Connect plugin |
| D184 | warning |
For the kafka-log plugin, one or more of the following config fields are set: custom_fields_by_lua but Kong Gateway versions < 3.4.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
Kafka Log plugin |
| D185 | warning |
For the openid-connect plugin, one or more of the following config fields are set: token_cache_key_include_scope but Kong Gateway versions < 3.4.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
OpenID Connect plugin |
| D186 | warning |
For the forward-proxy plugin, one or more of the following config fields are set in a reference format: auth_username, auth_password but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Forward Proxy plugin |
| D187 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set in a reference format: authentication.user, authentication.password but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Kafka Upstream plugin |
| D188 | warning |
For the kafka-log plugin, one or more of the following config fields are set in a reference format: authentication.user, authentication.password but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Kafka Log plugin |
| D189 | warning |
For the ldap-auth-advanced plugin, one or more of the following config fields are set in a reference format: ldap_password, bind_dn but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
LDAP Authentication Advanced plugin |
| D190 | warning |
For the openid-connect plugin, one or more of the following config fields are set in a reference format: client_id, client_secret, session_secret, session_redis_username, session_redis_password but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
OpenID Connect plugin |
| D191 | warning |
For the request-transformer-advanced plugin, one or more of the following config fields are set in a reference format: rename.body, rename.headers, rename.querystring, replace.body, replace.headers, replace.querystring, add.body, add.headers, add.querystring, append.body, append.headers, append.querystring but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Request Transformer Advanced plugin |
| D192 | warning |
For the graphql-rate-limiting-advanced plugin, instances have been configured with strategy=redis and the cluster_addresses field set. This is not supported in Kong Gateway versions < 3.4.1.0. For data plane nodes with version < 3.2.0.0, the plugin has been completely removed.
|
Unset the cluster_addresses field for the plugin, or upgrade Kong Gateway to a version >= 3.4.1.0.
|
Graphql Rate Limiting Advanced plugin |
| D193 | warning |
For the graphql-rate-limiting-advanced plugin, instances have been configured with strategy=redis and the cluster_addresses field set. This is not supported in Kong Gateway versions < 3.4.1.0. For data plane nodes with version >= 3.2.0.0 and < 3.4.1.0, the plugin configuration has been changed to config.strategy=cluster and config.sync_rate=-1.
|
Unset the redis fields for the plugin, or upgrade Kong Gateway to a version >= 3.4.1.0.
|
Graphql Rate Limiting Advanced plugin |
| D194 | warning |
For the canary plugin, a configuration start time is in the past and will be sent to the data plane node(s). This is not supported in Kong Gateway versions < 3.4.1.0.
|
Fix the canary plugin configuration or upgrade dataplane to 3.4.1.0+.
|
Canary plugin |
| D195 | warning |
For the openid-connect plugin, the using_pseudo_issuer config field is set, but only Kong Gateway versions >= 3.4.1.0 and >= 3.3.1.2 for the 3.3 series support this field. Plugin features that rely on this field are not working as intended.
|
Please upgrade Kong Gateway or remove this field from configuration. | OpenID Connect plugin |
| D196 | warning |
For the proxy-cache-advanced plugin, one or more of the following config fields are set: response_headers but Kong Gateway versions < 3.5.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
Proxy Cache Advanced plugin |
| D197 | warning |
For the oas-validation plugin, one or more of the following config fields are set: include_base_path but Kong Gateway versions < 3.4.3.6 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.4.3.6 or above.
|
OAS Validation plugin |
| D198 | warning |
For the mocking plugin, one or more of the following config fields are set: include_base_path but Kong Gateway versions < 3.5.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
Mocking plugin |
| D199 | warning |
For the openid-connect plugin, one or more of the following config fields are set: introspection_token_param_name, revocation_token_param_name but Kong Gateway versions < 3.5.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
OpenID Connect plugin |
| D200 | warning |
For the openid-connect plugin, the unauthorized_destroy_session config field is set, but only Kong Gateway versions >=3.4.1.0 and >=2.8.4.5 for the 2.8 serie support this field. Plugin features that rely on this field are not working as intended.
|
Please upgrade Kong Gateway or remove this field from configuration. | OpenID Connect plugin |
| D201 | warning |
For the openid-connect plugin, one or more of the following config fields are set: proof_of_possession_mtls, proof_of_possession_auth_methods_validation but Kong Gateway versions < 3.5.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
OpenID Connect plugin |
| D202 | warning |
Instance(s) of Konnect Application Registrations have been configured with the field consumer_groups set. This is not supported in Kong Gateway versions < 3.5.0.0. Application Registration is still functioning correctly, but you may want to upgrade to gain additional functionality.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
App Registration |
| D203 | warning |
For the proxy-cache-advanced plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.6.0.0. The plugin has been removed in the data plane node.
|
Unset the consumer_group fields for the plugin, or upgrade Kong Gateway to a version >= 3.6.0.0.
|
Proxy Cache Advanced plugin |
| D204 | warning |
Instance(s) of Konnect Application Registration have been configured with one or more of the following fields: application_context, auth_strategy_id, and exhausted_scopes set. These fields are not supported in Kong Gateway versions < 3.6.0.0. Application Registration is still functioning correctly, but you may want to upgrade to gain additional functionality.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
App Registration |
| D205 | warning |
For the request-validator plugin, the config field content_type_parameter_validation has been used. This is not supported in Kong Gateway versions older than 3.6.1.5 and versions older than 3.7.1.0 for the 3.7.x release line.
|
Please upgrade Kong Gateway to a version that supports this field. | Request Validator plugin |
| D206 | warning |
For the openid-connect plugin, one or more of the following config fields are set: tls_client_auth_cert_id, tls_client_auth_ssl_verify, mtls_token_endpoint, mtls_introspection_endpoint, mtls_revocation_endpoint but Kong Gateway versions < 3.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
OpenID Connect plugin |
| D207 | error |
The plugin openid-connect was configured with mTLS client auth but Kong Gateway versions < 3.6.0.0 do not support it. As a result, the entire configuration is rejected and Konnect will not update the configuration in the Data Plane Node until this defect is corrected.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
OpenID Connect plugin |
| D208 | warning |
For the openid-connect plugin, the introspection_headers_values config was found to contain a value matching the referenceable field format, but only Kong Gateway versions >= 3.5.0.4 support this field. Plugin features that rely on this field are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.4 or above.
|
OpenID Connect plugin |
| D209 | error |
The plugin konnect-application-auth was defined at route level but Kong Gateway versions < 3.6.0.0 do not support it. As a result, the entire configuration is rejected and Konnect will not update the configuration in the Data Plane Node until this defect is corrected.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
N/A |
| D210 | warning |
For the openid-connect plugin, one or more of the following login_redirect_uri, logout_redirect_uri and scopes fields are set in a reference format, but only Kong Gateways falling in the following version ranges support reference formats for these fields: versions >= 3.4.3.2 and < 3.5.0.0; versions >= 3.5.0.2. These fields have not been modified and will fail validation in the data plane. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway or remove fields using reference values. Alternatively, update fields using reference values to instead use explicit values. | OpenID Connect plugin |
| D211 | warning |
For the openid-connect plugin, one or more of the following config fields are set: pushed_authorization_request_endpoint, pushed_authorization_request_endpoint_auth_method, require_pushed_authorization_requests, require_proof_key_for_code_exchange but Kong Gateway versions < 3.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
OpenID Connect plugin |
| D212 | warning |
For the key-auth plugin, one or more of the following config fields are set: ttl but Kong Gateway versions < 3.4.1.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.4.1.0 or above.
|
Key Auth plugin |
| D213 | warning |
For the mtls-auth plugin, one or more of the following config fields are set: default_consumer but Kong Gateway versions < 3.4.3.5 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.4.3.5 or above.
|
mTLS Authentication plugin |
| D214 | error | There is a syntax error in one or more route expression. | Rewrite the expression, following the route expression language. | Expressions Router |
| D215 | error | A route expression is using one or more fields that are not supported by this specific Kong Gateway version. | Update Kong Gateway to a version that supports all used expression fields, or rewrite the expressions using only fields supported by your Kong Gateway version. | Expressions Router |
| D216 | warning |
For the oas-validation plugin, the api_spec_encoded config field is set, but only Kong Gateway versions >= 3.4.3.6 for the 3.4 series and >= 3.6.1.2 for the 3.6 series support this field. Plugin features that rely on this field are not working as intended.
|
Please upgrade Kong Gateway or remove this field from configuration. | OAS Validation plugin |
| D217 | warning |
For the openid-connect plugin, config.response_mode field has been set either to query.jwt, form_post.jwt, fragment.jwt or jwt. This is not supported in Kong Gateway versions < 3.7.0.0. The plugin configuration has been changed to config.response_mode=query in the data plane node.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
OpenID Connect plugin |
| D218 | warning |
Plugin ai-azure-content-safety is not available in Kong Gateway versions < 3.7.0.0.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Azure Content Safety plugin |
| D219 | warning |
For the graphql-proxy-cache-advanced plugin, config.strategy field has been set to redis. This is not supported in Kong Gateway versions < 3.7.0.0. The plugin configuration has been changed to config.strategy=memory in the data plane node.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
Graphql Proxy Cache Advanced plugin |
| D220 | warning |
For the graphql-proxy-cache-advanced plugin, one or more of the following config fields are set: redis but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
Graphql Proxy Cache Advanced plugin |
| D221 | warning |
For the graphql-proxy-cache-advanced plugin, one or more of the following config fields are set: bypass_on_err but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
Graphql Proxy Cache Advanced plugin |
| D222 | warning |
For the openid-connect plugin, one or more of the following config fields are set: proof_of_possession_dpop, dpop_use_nonce, dpop_proof_lifetime but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
OpenID Connect plugin |
| D223 | warning |
For the openid-connect plugin, one or more of the following config fields are set: require_signed_request_object but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
OpenID Connect plugin |
| D224 | warning |
Plugin ai-rate-limiting-advanced is not available in Kong Gateway versions < 3.7.0.0.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D225 | warning |
For the oas-validation plugin, one or more of the following config fields are set: custom_base_path but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
OAS Validation plugin |
| D226 | warning |
For the mocking plugin, one or more of the following config fields are set: custom_base_path but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
Mocking plugin |
| D227 | warning |
For the konnect-application-auth plugin, one or more of the following config fields are set: v2_strategies but Kong Gateway versions < 3.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
App Registration |
| D228 | error |
The plugin konnect-application-auth was defined with auth_type as v2-strategies but Kong Gateway versions < 3.6.0.0 do not support it. As a result, the entire configuration is rejected and Konnect will not update the configuration in the Data Plane Node until this defect is corrected.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
App Registration |
| D229 | warning |
The konnect-application-auth plugin was configured with v2_strategies.openid_connect, where the configurations included changes that were added to the openid-connect plugin in Kong Gateway versions after 3.6.0.0. For more details, please see the tracked changes for openid-connect.
|
Please update Kong Gateway to the corresponding version where the fields were added. | App Registration |
| D230 | warning |
The konnect-application-auth plugin was configured with v2_strategies.key_auth, where the configurations included changes that were added to the key-auth plugin in Kong Gateway versions after 3.6.0.0. For more details, please see the tracked changes for key-auth.
|
Please update Kong Gateway to the corresponding version where the fields were added. | App Registration |
| D231 | warning |
The konnect-application-auth plugin was configured with v2_strategies.openid_connect, where the configurations included changes that were added to the openid-connect plugin in Kong Gateway versions after 3.6.0.0. For more details, please see the tracked changes for openid-connect.
|
Please update Kong Gateway to the corresponding version where the fields were added. | App Registration |
| D232 | warning |
For the rate-limiting-advanced plugin, config.identifier field has been set to consumer-group. This is not supported in Kong Gateway versions < 3.6.0.0. The plugin configuration has been changed to config.identifier=consumer in the data plane node and might not work as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Rate Limiting Advanced plugin |
| D233 | warning |
For the ai-rate-limiting-advanced plugin, one or more of the following fields: tokens_count_strategy have been set to one or more of the following values: cost but Kong Gateway versions < 3.8.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: total_tokens. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D234 | warning |
Plugin ai-proxy-advanced is not available in Kong Gateway versions < 3.8.0.0.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy Advanced plugin |
| D235 | warning |
Plugin ai-semantic-cache is not available in Kong Gateway versions < 3.8.0.0.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Semantic Cache plugin |
| D236 | warning |
Plugin confluent is not available in Kong Gateway versions < 3.8.0.0.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Confluent plugin |
| D237 | warning |
For the openid-connect plugin, one or more of the following config fields are set: claims_forbidden but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
OpenID Connect plugin |
| D239 | warning |
Plugin header-cert-auth is not available in Kong Gateway versions < 3.8.0.0.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Header Cert Auth plugin |
| D240 | warning |
Plugin ai-semantic-prompt-guard is not available in Kong Gateway versions < 3.8.0.0.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| D241 | warning |
For the ai-rate-limiting-advanced plugin, one or more instances have been configured with the bedrock LLM provider. This is not supported in Kong Gateway versions < 3.8.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D242 | warning |
For the ai-rate-limiting-advanced plugin, one or more instances have been configured with the gemini LLM provider. This is not supported in Kong Gateway versions < 3.8.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D243 | warning |
Plugin json-threat-protection is not available in Kong Gateway versions < 3.8.0.0.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
JSON Threat Protection plugin |
| D244 | warning |
Plugin upstream-oauth is not available in Kong Gateway versions < 3.8.0.0.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Upstream Oauth plugin |
| D245 | warning |
For the rate-limiting-advanced plugin, either redis.sentinel_nodes or redis.cluster_nodes are set. These settings are not supported in Kong Gateway versions < 3.8.0.0 and have been updated to redis.sentinel_addresses and redis.cluster_addresses respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Rate Limiting Advanced plugin |
| D246 | warning |
For the rate-limiting-advanced plugin, either redis.sentinel_addresses or redis.cluster_addresses are set. These settings are not supported in Kong Gateway versions >= 3.8.0.0 and have been updated to redis.sentinel_nodes and redis.cluster_nodes respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Rate Limiting Advanced plugin |
| D247 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: redis.cluster_max_redirections, redis.connection_is_proxied but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Rate Limiting Advanced plugin |
| D248 | warning |
For the proxy-cache-advanced plugin, one or more of the following config fields are set: redis.cluster_max_redirections, redis.connection_is_proxied but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Proxy Cache Advanced plugin |
| D249 | warning |
For the proxy-cache-advanced plugin, either redis.sentinel_nodes or redis.cluster_nodes are set. These settings are not supported in Kong Gateway versions < 3.8.0.0 and have been updated to redis.sentinel_addresses and redis.cluster_addresses respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Proxy Cache Advanced plugin |
| D250 | warning |
For the proxy-cache-advanced plugin, either redis.sentinel_addresses or redis.cluster_addresses are set. These settings are not supported in Kong Gateway versions >= 3.8.0.0 and have been updated to redis.sentinel_nodes and redis.cluster_nodes respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Proxy Cache Advanced plugin |
| D252 | warning |
For the ai-rate-limiting-advanced plugin, either redis.sentinel_nodes or redis.cluster_nodes are set. These settings are not supported in Kong Gateway versions < 3.8.0.0 and have been updated to redis.sentinel_addresses and redis.cluster_addresses respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D253 | warning |
For the ai-rate-limiting-advanced plugin, either redis.sentinel_addresses or redis.cluster_addresses are set. These settings are not supported in Kong Gateway versions >= 3.8.0.0 and have been updated to redis.sentinel_nodes and redis.cluster_nodes respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D254 | warning |
For the ai-rate-limiting-advanced plugin, one or more of the following config fields are set: redis.cluster_max_redirections, redis.connection_is_proxied but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D255 | warning |
For the graphql-proxy-cache-advanced plugin, one or more of the following config fields are set: redis.cluster_max_redirections, redis.connection_is_proxied but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Graphql Proxy Cache Advanced plugin |
| D256 | warning |
For the graphql-proxy-cache-advanced plugin, either redis.sentinel_nodes or redis.cluster_nodes are set. These settings are not supported in Kong Gateway versions < 3.8.0.0 and have been updated to redis.sentinel_addresses and redis.cluster_addresses respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Graphql Proxy Cache Advanced plugin |
| D257 | warning |
For the graphql-proxy-cache-advanced plugin, either redis.sentinel_addresses or redis.cluster_addresses are set. These settings are not supported in Kong Gateway versions >= 3.8.0.0 and have been updated to redis.sentinel_nodes and redis.cluster_nodes respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Graphql Proxy Cache Advanced plugin |
| D258 | warning |
For the saml plugin, one or more of the following config fields are set: redis but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
SAML plugin |
| D259 | warning |
For the openid-connect plugin, one or more of the following config fields are set: cluster_cache_strategy, cluster_cache_redis but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
OpenID Connect plugin |
| D260 | warning |
For the graphql-rate-limiting-advanced plugin, either redis.sentinel_nodes or redis.cluster_nodes are set. These settings are not supported in Kong Gateway versions < 3.8.0.0 and have been updated to redis.sentinel_addresses and redis.cluster_addresses respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Graphql Rate Limiting Advanced plugin |
| D261 | warning |
For the graphql-rate-limiting-advanced plugin, either redis.sentinel_addresses or redis.cluster_addresses are set. These settings are not supported in Kong Gateway versions >= 3.8.0.0 and have been updated to redis.sentinel_nodes and redis.cluster_nodes respectively.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Graphql Rate Limiting Advanced plugin |
| D262 | warning |
For the graphql-rate-limiting-advanced plugin, one or more of the following config fields are set: redis.cluster_max_redirections, redis.connection_is_proxied but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Graphql Rate Limiting Advanced plugin |
| D263 | warning |
For the rate-limiting-advanced plugin, conflicting redis configurations are set. This is not supported in Kong Gateway versions < 3.8. The plugin configuration has been updated to remove the conflicting redis configurations.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Rate Limiting Advanced plugin |
| D264 | warning |
For the proxy-cache-advanced plugin, conflicting redis configurations are set. This is not supported in Kong Gateway versions < 3.8. The plugin configuration has been updated to remove the conflicting redis configurations.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Proxy Cache Advanced plugin |
| D265 | warning |
For the ai-rate-limiting-advanced plugin, conflicting redis configurations are set. This is not supported in Kong Gateway versions < 3.8. The plugin configuration has been updated to remove the conflicting redis configurations.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D266 | warning |
For the graphql-proxy-cache-advanced plugin, conflicting redis configurations are set. This is not supported in Kong Gateway versions < 3.8. The plugin configuration has been updated to remove the conflicting redis configurations.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Graphql Proxy Cache Advanced plugin |
| D267 | warning |
For the graphql-rate-limiting-advanced plugin, conflicting redis configurations are set. This is not supported in Kong Gateway versions < 3.8. The plugin configuration has been updated to remove the conflicting redis configurations.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Graphql Rate Limiting Advanced plugin |
| D268 | warning |
For the konnect-application-auth plugin, one or more deprecated redis fields have been set on the plugin config. This is not supported in Kong Gateway versions >= 3.8. The plugin configuration has been updated.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
N/A |
| D269 | warning |
For the konnect-application-auth plugin, new redis configurations are set. This is not supported in Kong Gateway versions <3.8. The plugin configuration has been updated.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
N/A |
| D270 | warning |
For the konnect-application-auth and openid-connect plugins, new redis configurations are set. This is not supported in Kong Gateway versions <3.8. The plugin configuration has been updated.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
OpenID Connect plugin |
| D271 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: lock_dictionary_name but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
Rate Limiting Advanced plugin |
| D272 | warning |
For the openid-connect plugin, one or more of the following config fields are set in a reference format: http_proxy_authorization, https_proxy_authorization but Kong Gateway versions < 3.9.0.0 do not support the reference format for these fields. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
OpenID Connect plugin |
| D273 | warning |
Plugin redirect is not available in Kong Gateway versions < 3.9.0.0.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
Redirect plugin |
| D274 | warning |
Plugin service-protection is not available in Kong Gateway versions < 3.9.0.0.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
Service Protection plugin |
| D275 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: compound_identifier but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
Rate Limiting Advanced plugin |
| D276 | warning |
For the ai-proxy-advanced plugin, one or more instances are configured with targets[].model.provider field set to: huggingface but Kong Gateway versions < 3.9.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Proxy Advanced plugin |
| D277 | warning |
Plugin injection-protection is not available in Kong Gateway versions < 3.9.0.0.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
Injection Protection plugin |
| D278 | warning |
For the ai-semantic-cache plugin, one or more of the following config fields are set: ignore_tool_prompts but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Semantic Cache plugin |
| D279 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: response_streaming but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Proxy Advanced plugin |
| D280 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: redis.redis_proxy_type but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
Rate Limiting Advanced plugin |
| D281 | warning |
For the openid-connect plugin, one or more of the following config fields are set: introspection_post_args_client_headers but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
OpenID Connect plugin |
| D282 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets[].model.options.huggingface but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Proxy Advanced plugin |
| D283 | warning |
For the ai-semantic-cache plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.9.0.0. The plugin has been removed in the data plane node.
|
Unset the consumer_group fields for the plugin, or upgrade Kong Gateway to a version >= 3.9.0.0.
|
AI Semantic Cache plugin |
| D284 | warning | A route expression is using deprecated fields | Replace deprecated features with currently preferred ones | Expressions Router |
| D285 | warning |
For any ai-proxy-advanced, ai-semantic-cache, or ai-semantic-prompt-guard plugins, the config.embeddings.model.name field has been set to a free-form text value. This is not supported in Kong Gateway versions < 3.9.0.0. The plugin configuration has been updated to use the default embeddings model for the selected provider.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Proxy Advanced plugin |
| D286 | error |
One or more of the following plugins are not supported for Cloud Gateways: file-log, syslog, app-dynamics, prometheus.
|
Remove the unsupported plugins | Kong Gateway Plugins Compatibility |
| D290 | warning |
For the json-threat-protection plugin, one or more of the following config fields are set: allow_duplicate_object_entry_name but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
JSON Threat Protection plugin |
| D291 | warning |
For AWS vaults, the config.region field has been set to an unsupported value in Kong Gateway versions <3.4.3.17 for the 3.4.x series, <3.7.1.5 for the 3.7.x series, <3.8.1.1 for the 3.8.x series, or <3.9.1.0 for the 3.9.x series. The vault has been removed from the configuration.
|
Please upgrade Kong Gateway to version 3.4.3.17 or above for the 3.4.x series, 3.7.1.5 or above for the 3.7.x series, 3.8.1.1 or above for the 3.8.x series, 3.9.1.0 or above for the 3.9.x series or newer than 3.10.0.0, or use a supported AWS region.
|
Vault provider-specific configuration parameters |
| D292 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: allowed_topics but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Kafka Upstream plugin |
| D293 | warning |
Plugin ai-rag-injector is not available in Kong Gateway versions < 3.10.0.0.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI RAG Injector plugin |
| D294 | warning |
For the confluent plugin, one or more of the following config fields are set: allowed_topics but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Confluent plugin |
| D295 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: message_by_lua_functions but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Kafka Upstream plugin |
| D296 | warning |
For the confluent plugin, one or more of the following config fields are set: message_by_lua_functions but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Confluent plugin |
| D297 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: topics_query_arg but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Kafka Upstream plugin |
| D298 | warning |
Plugin ai-sanitizer is not available in Kong Gateway versions < 3.10.0.0.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Sanitizer plugin |
| D299 | warning |
Plugin request-callout is not available in Kong Gateway versions < 3.10.0.0.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Request Callout plugin |
| D300 | warning |
For the ai-proxy-advanced plugin, config.balancer.algorithm has been set to priority. This is not supported in Kong Gateway versions < 3.10.0.0. The plugin configuration has been changed to config.balancer.algorithm=round-robin in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy Advanced plugin |
| D301 | warning |
For the confluent plugin, one or more of the following config fields are set: topics_query_arg but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Confluent plugin |
| D302 | warning |
Plugin kafka-consume is not available in Kong Gateway versions < 3.10.0.0.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Kafka Consume plugin |
| D303 | warning |
Plugin confluent-consume is not available in Kong Gateway versions < 3.10.0.0.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Confluent Consume plugin |
| D304 | warning |
For the ai-proxy-advanced plugin, config.balancer.tokens_count_strategy has been set to cost. This is not supported in Kong Gateway versions < 3.10.0.0. The plugin configuration has been changed to config.balancer.tokens_count_strategy=total-tokens in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy Advanced plugin |
| D305 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: balancer.failover_criteria but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy Advanced plugin |
| D307 | warning |
For the ai-request-transformer plugin, one or more instances are configured with llm.model.provider huggingface.This is not supported in Kong Gateway versions < 3.9.0.0.The impacted plugin have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Request Transformer plugin |
| D308 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.model.options.huggingface but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Request Transformer plugin |
| D309 | warning |
For the ai-response-transformer plugin, one or more instances are configured with llm.model.provider huggingface.This is not supported in Kong Gateway versions < 3.9.0.0.The impacted plugin have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Response Transformer plugin |
| D310 | warning |
For the ai-rate-limiting-advanced plugin, the following field:type pairs were detected: window_size:array, limit:array. Field(s) in Kong Gateway versions < 3.10.0.0 use the following type(s): window_size:number, limit:number. The following action(s) have been taken: impacted fields converted to numeric type, impacted fields set to the first element in the array. Features that rely on these fields may not be working as intended.
|
Please take one or more of the following actions: Please upgrade Kong Gateway to version 3.10.0.0 or above., Update the plugin configuration to use the correct field types.
|
AI Rate Limiting Advanced plugin |
| D311 | warning |
For the ai-rate-limiting-advanced plugin, the following field:type pairs were detected: window_size:number, limit:number. Field(s) in Kong Gateway versions >= 3.10.0.0 use the following type(s): window_size:array, limit:array. The following action(s) have been taken: numbers were converted to arrays on impacted fields. Features that rely on these fields may not be working as intended.
|
Please take one or more of the following actions: Update the plugin configuration to use the new field types | AI Rate Limiting Advanced plugin |
| D312 | warning |
For the graphql-rate-limiting-advanced plugin, one or more of the following config fields are set: pass_all_downstream_headers but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Graphql Rate Limiting Advanced plugin |
| D321 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: embeddings.model.options.huggingface, embeddings.model.options.azure, embeddings.model.options.bedrock, embeddings.model.options.gemini but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy Advanced plugin |
| D322 | warning |
For the ai-proxy-advanced plugin, config.embeddings.model.provider has been set to huggingface, azure, bedrock or gemini. This is not supported in Kong Gateway versions < 3.10.0.0. The plugin configuration has been changed to config.embeddings.model.provider=openai in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy Advanced plugin |
| D323 | warning |
For the ai-semantic-cache plugin, one or more of the following config fields are set: embeddings.model.options.huggingface, embeddings.model.options.azure, embeddings.model.options.bedrock, embeddings.model.options.gemini but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Semantic Cache plugin |
| D324 | warning |
For the ai-semantic-cache plugin, config.embeddings.model.provider has been set to huggingface, azure, bedrock or gemini. This is not supported in Kong Gateway versions < 3.10.0.0. The plugin configuration has been changed to config.embeddings.model.provider=openai in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Semantic Cache plugin |
| D325 | warning |
For the ai-semantic-prompt-guard plugin, one or more of the following config fields are set: embeddings.model.options.huggingface, embeddings.model.options.azure, embeddings.model.options.bedrock, embeddings.model.options.gemini but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| D326 | warning |
For the ai-semantic-prompt-guard plugin, config.embeddings.model.provider has been set to huggingface, azure, bedrock or gemini. This is not supported in Kong Gateway versions < 3.10.0.0. The plugin configuration has been changed to config.embeddings.model.provider=openai in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| D327 | warning |
For the ai-semantic-cache plugin, one or more of the following config fields are set: vectordb.pgvector but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Semantic Cache plugin |
| D328 | warning |
For the ai-semantic-prompt-guard plugin, one or more of the following config fields are set: vectordb.pgvector but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| D329 | warning |
For any ai-proxy-advanced, ai-semantic-cache, ai-semantic-prompt-guard, ai-proxy, ai-prompt-decorator, ai-prompt-guard or ai-rate-limiting-advanced plugins, the config.llm_format field has been configured. This is not supported in Kong Gateway versions < 3.10.0.0. The field has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Kong Plugin Hub |
| D330 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: vectordb.pgvector but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy Advanced plugin |
| D331 | warning |
For the ai-rate-limiting-advanced plugin, one or more instances have been configured with the huggingface LLM provider. This is not supported in Kong Gateway versions < 3.9.0.0. The llm provider has been replaced by requestPrompt in the data plane node.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D332 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets[].model.options.bedrock.aws_role_session_name, targets[].model.options.bedrock.aws_sts_endpoint_url, targets[].model.options.bedrock.aws_assume_role_arn but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy Advanced plugin |
| D333 | warning |
For the ai-proxy-advanced plugin, the config.vectordb.strategy field has been configured to pgvector. This is not supported in Kong Gateway versions < 3.10.0.0. The field has been migrated to redis.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy Advanced plugin |
| D334 | warning |
For the ai-semantic-cache plugin, the config.vectordb.strategy field has been configured to pgvector. This is not supported in Kong Gateway versions < 3.10.0.0. The field has been migrated to redis.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Semantic Cache plugin |
| D335 | warning |
For the ai-semantic-prompt-guard plugin, the config.vectordb.strategy field has been configured to pgvector. This is not supported in Kong Gateway versions < 3.10.0.0. The field has been migrated to redis.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| D336 | warning |
For the plugins including ai-proxy-advanced, graphql-proxy-cache-advanced, graphql-rate-limiting-advanced, openid-connect, proxy-cache-advanced, rate-limiting-advanced, request-callout, saml, service-protection, and upstream-oauth, the redis timeout fields connect_timeout, read_timeout, and send_timeout have conflicting values. This is not supported in Kong Gateway versions >= 3.8.0.0 and < 3.10.0.1. The affected plugins have been removed from the configuration.
|
Please either update the redis timeout values to be the same or upgrade to Kong Gateway to versions 3.10.0.1 and above. | Kong Plugins |
| D337 | warning |
For the confluent plugin, one or more of the following config fields are set: key_query_arg but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Confluent plugin |
| D338 | warning |
For the kafka-log plugin, one or more of the following config fields are set: key_query_arg but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Kafka Log plugin |
| D339 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: key_query_arg but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Kafka Upstream plugin |
| D340 | warning |
Plugin ai-prompt-compressor is not available in Kong Gateway versions < 3.11.0.0.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Prompt Compressor plugin |
| D341 | warning |
For the vault entity, one or more of the following schema fields are set: base64_decode but Kong Gateway versions < 3.11.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Vault entity |
| D342 | warning |
For the ai-rate-limiting-advanced plugin, one or more of the following config fields are set: namespace but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D343 | warning |
Plugin ai-llm-as-judge is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI LLM as Judge plugin |
| D349 | warning |
The vault(conjur) entity is being used, but Kong Gateway versions < 3.11.0.0 do not support this entity.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Vault entity |
| D350 | warning |
For the vaults entity, one or more of the following schema fields are set: auth_method=cert but Kong Gateway versions < 3.11.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Vault entity |
| D351 | warning |
For the vaults entity, one or more of the following schema fields are set: cert_auth_role_name, cert_auth_cert, cert_auth_cert_key but Kong Gateway versions < 3.11.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Vault entity |
| D352 | warning |
For the kafka-consume plugin, one or more instances are configured with mode field set to: websocket but Kong Gateway versions < 3.11.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Kafka Consume plugin |
| D353 | warning |
For the upstream entity, one or more instances are configured with either the algorithm field set to sticky-sessions, or the fields sticky_sessions_cookie and sticky_sessions_cookie_path set to non-default values. However, Kong Gateway versions earlier than 3.11.0.0 do not support these configurations. The affected upstreams have been updated with the algorithm value of consistent-hashing, and the fields sticky_sessions_cookie and sticky_sessions_cookie_path have been removed. As a result, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Upstream entity |
| D354 | warning |
For the ai-proxy-advanced plugin, the protocol field has been set to one of: ws, wss. This is not supported in Kong Gateway versions < 3.11.0.0. Unsupported protocols have been removed. If no protocols are left, the plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D355 | warning |
Plugin solace-upstream is not available in Kong Gateway versions < 3.11.0.0.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Solace Upstream plugin |
| D356 | warning |
For the confluent plugin, one or more of the following config fields are set: schema_registry but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Confluent plugin |
| D357 | warning |
For the confluent-consume plugin, one or more of the following config fields are set: schema_registry but Kong Gateway versions < 3.11.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Confluent Consume plugin |
| D358 | warning |
For the kafka-consume plugin, one or more of the following config fields are set: schema_registry but Kong Gateway versions < 3.11.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Kafka Consume plugin |
| D359 | warning |
For the kafka-log plugin, one or more of the following config fields are set: schema_registry but Kong Gateway versions < 3.11.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Kafka Log plugin |
| D360 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: schema_registry but Kong Gateway versions < 3.11.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Kafka Upstream plugin |
| D361 | warning |
For the confluent-consume plugin, one or more of the following config fields are set: topics[].schema_registry but Kong Gateway versions < 3.11.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Confluent Consume plugin |
| D362 | warning |
For the kafka-consume plugin, one or more of the following config fields are set: topics[].schema_registry but Kong Gateway versions < 3.11.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Kafka Consume plugin |
| D364 | error |
For the service entity, one or more of the following schema fields are set: service.tls_sans but Kong Gateway versions < 3.10.0.6 do not support these fields.The unsupported fields have been removed from the entity configuration.
|
Please upgrade Kong Gateway to version 3.10.0.6 or above.
|
Service entity |
| D365 | warning |
Plugin ai-aws-guardrails is not available in Kong Gateway versions < 3.11.0.0.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI AWS Guardrails plugin |
| D367 | warning |
Plugin ai-mcp-proxy is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI MCP Proxy plugin |
| D368 | warning |
Plugin datakit is not available in Kong Gateway versions < 3.11.0.0.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Datakit plugin |
| D369 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with llm_format set to bedrock/gemini and a route_type set to preserve but Kong Gateway versions < 3.11.0.0 do not support this value. The impacted targets have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D370 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with route_type field set to one of: llm/v1/assistants, audio/v1/audio/speech, audio/v1/audio/transcriptions, audio/v1/audio/translations, llm/v1/batches, llm/v1/embeddings, llm/v1/files, image/v1/images/edits, image/v1/images/generations, realtime/v1/realtime, llm/v1/responses but Kong Gateway versions < 3.11.0.0 do not support this value. The impacted targets have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D371 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets.#.model.options.embeddings_dimensions but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D372 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets[].model.options.cohere but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D390 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: embeddings.model.options.bedrock.embeddings_normalize but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D391 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets.#.model.options.bedrock.embeddings_normalize but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D392 | warning |
For the ai-rag-injector plugin, one or more of the following config fields are set: embeddings.model.options.bedrock.embeddings_normalize but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI RAG Injector plugin |
| D393 | warning |
For the ai-semantic-cache plugin, one or more of the following config fields are set: embeddings.model.options.bedrock.embeddings_normalize but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Semantic Cache plugin |
| D394 | warning |
For the ai-semantic-prompt-guard plugin, one or more of the following config fields are set: embeddings.model.options.bedrock.embeddings_normalize but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| D395 | warning |
For the ai-proxy-advanced plugin, one or more of the following fields: llm_format have been set to one or more of the following values: cohere, huggingface but Kong Gateway versions < 3.11.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D396 | warning |
For the ai-rate-limiting-advanced plugin, one or more of the following fields: llm_format have been set to one or more of the following values: cohere, huggingface but Kong Gateway versions < 3.11.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D397 | warning |
For the ai-semantic-cache plugin, one or more of the following fields: llm_format have been set to one or more of the following values: cohere, huggingface but Kong Gateway versions < 3.11.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Semantic Cache plugin |
| D398 | warning |
For the ai-semantic-prompt-guard plugin, one or more of the following fields: llm_format have been set to one or more of the following values: cohere, huggingface but Kong Gateway versions < 3.11.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| D399 | warning |
For the ai-semantic-prompt-guard plugin, one or more of the following config fields are set: genai_category but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| D400 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: genai_category but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy Advanced plugin |
| D401 | warning |
For the route entity, one or more of the following schema fields are set: path_handling but Kong Gateway versions < 3.7.0.0 do not support these fields.The unsupported fields have been removed from the entity configuration.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
Route entity |
| D402 | warning |
For the confluent-consume plugin, one or more of the following config fields are set: message_by_lua_functions but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Confluent Consume plugin |
| D403 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: message_by_lua_functions but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Kafka Upstream plugin |
| D405 | warning |
Plugin ai-semantic-response-guard is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Semantic Response Guard plugin |
| D406 | warning |
For the ai-azure-content-safety plugin, one or more of the following config fields are set: guarding_mode but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Azure Content Safety plugin |
| D407 | warning |
For the ai-azure-content-safety plugin, one or more of the following config fields are set: stop_on_error but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Azure Content Safety plugin |
| D408 | warning |
For the ai-azure-content-safety plugin, one or more of the following config fields are set: response_buffer_size but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Azure Content Safety plugin |
| D409 | warning |
For the ai-aws-guardrails plugin, one or more of the following config fields are set: aws_assume_role_arn, aws_role_session_name, aws_sts_endpoint_url but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI AWS Guardrails plugin |
| D410 | warning |
For the rate-limiting-advanced plugin, one or more of the following config fields are set: throttling but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Rate Limiting Advanced plugin |
| D411 | warning |
For the ai-proxy-advanced plugin, one or more of the following fields: balancer.tokens_count_strategy have been set to one or more of the following values: llm-accuracy but Kong Gateway versions < 3.12.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: llm-accuracy. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Proxy Advanced plugin |
| D412 | warning |
For the confluent-consume plugin, one or more of the following config fields are set: schema_registry.confluent.authentication.oauth2, schema_registry.confluent.authentication.oauth2_client but Kong Gateway versions < 3.12.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Confluent Consume plugin |
| D413 | warning |
For the confluent-consume plugin, one or more of the following config fields are set: topics[].schema_registry.confluent.authentication.oauth2, topics[].schema_registry.confluent.authentication.oauth2_client but Kong Gateway versions < 3.12.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Confluent Consume plugin |
| D414 | warning |
For the kafka-consume plugin, one or more of the following config fields are set: schema_registry.confluent.authentication.oauth2, schema_registry.confluent.authentication.oauth2_client but Kong Gateway versions < 3.12.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Kafka Consume plugin |
| D415 | warning |
For the kafka-consume plugin, one or more of the following config fields are set: topics[].schema_registry.confluent.authentication.oauth2, topics[].schema_registry.confluent.authentication.oauth2_client but Kong Gateway versions < 3.12.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Kafka Consume plugin |
| D416 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: schema_registry.confluent.authentication.oauth2, schema_registry.confluent.authentication.oauth2_client but Kong Gateway versions < 3.12.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Kafka Upstream plugin |
| D417 | warning |
For the kafka-log plugin, one or more of the following config fields are set: schema_registry.confluent.authentication.oauth2, schema_registry.confluent.authentication.oauth2_client but Kong Gateway versions < 3.12.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Kafka Log plugin |
| D418 | warning |
For the confluent plugin, one or more of the following config fields are set: schema_registry.confluent.authentication.oauth2, schema_registry.confluent.authentication.oauth2_client but Kong Gateway versions < 3.12.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Confluent plugin |
| D420 | warning |
For the kafka-consume plugin, one or more of the following config fields are set: enable_dlq, dlq_topic but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Kafka Consume plugin |
| D421 | warning |
For the confluent-consume plugin, one or more of the following config fields are set: enable_dlq, dlq_topic but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Confluent Consume plugin |
| D422 | warning |
For the confluent-consume plugin, the protocol field has been set to one of: ws, wss. This is not supported in Kong Gateway versions < 3.12.0.0. Unsupported protocols have been removed. If no protocols are left, the plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Confluent Consume plugin |
| D423 | warning |
For the ai-sanitizer plugin, one or more of the following config fields are set: sanitization_mode, block_if_detected but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Sanitizer plugin |
| D424 | warning |
Plugin solace-consume is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Solace Consume plugin |
| D425 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets[].model.options.gemini.endpoint_id but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Proxy Advanced plugin |
| D426 | warning |
For the kafka-consume plugin, instances have been configured on a specific service. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin has been removed in the data plane node.
|
Unset the service fields for the plugin
|
Kafka Consume plugin |
| D427 | warning |
Plugin ace is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
N/A |
| D428 | warning | Konnect cloud’s ACE plugin workflow requires features introduced in Kong Gateway 3.12.0.0 and above. Some features of the ACE are not working as intended. |
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
N/A |
| D429 | warning |
Plugin ai-gcp-model-armor is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI GCP Model Armor plugin |
| D430 | warning |
For the request-callout plugin, the following field:type pairs were detected: request.url:string. Field(s) in Kong Gateway versions < 3.12.0.0 use the following type(s): request.url:url. The following action(s) have been taken: plugin removed. Features that rely on these fields may not be working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Request Callout plugin |
| D431 | warning |
Plugin solace-log is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Solace Log plugin |
| D432 | warning |
For the injection-protection plugin, one or more of the following fields: locations have been set to one or more of the following values: path, query but Kong Gateway versions < 3.12.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: path_and_query. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Injection Protection plugin |
| D433 | warning |
For the openid-connect plugin, one or more of the following config fields are set: consumer_groups_claim, consumer_groups_optional but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
OpenID Connect plugin |
| D434 | warning |
For the session plugin, one or more of the following config fields are set: bind but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Session plugin |
| D435 | warning |
Plugin jwt-signer is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
JWT Signer plugin |
| D436 | warning |
Plugin ai-mcp-oauth2 is not available in Kong Gateway versions < 3.12.0.0.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI MCP OAuth2 plugin |
| D437 | warning |
For the solace-upstream plugin, one or more of the following config fields are set: session.calculate_message_expiry, session.generate_rcv_timestamps, session.generate_send_timestamps, session.generate_sender_id, session.generate_sequence_number but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
Solace Upstream plugin |
| D438 | warning | Unsupported Datakit node type | Remove the invalid Datakit node or upgrade to a version that supports it. | Plugins Datakit |
| D439 | warning | Unsupported Datakit config element | Remove the invalid Datakit config element or upgrade to a version that supports it. | Plugins Datakit |
| D440 | warning |
For the targets entity, one or more of the following schema fields are set: failover but Kong Gateway versions < 3.12.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
Targets |
| D441 | warning |
For the solace-upstream plugin, one or more of the following config fields are set: session.properties.SESSION_GUARANTEED_WITH_WEB_TRANSPORT but Kong Gateway versions >= 3.12.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please take one or more of the following actions: Remove the field SESSION_GUARANTEED_WITH_WEB_TRANSPORT from session.properties in the plugin configuration
|
Solace Upstream plugin |
| D442 | warning |
For the kafka-consume plugin, one or more of the following config fields are set: enforce_latest_offset_reset but Kong Gateway versions < 3.10.0.6 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please set the enforce_latest_offset_reset field to false.
|
Kafka Consume plugin |
| D443 | warning |
For the confluent-consume plugin, one or more of the following config fields are set: enforce_latest_offset_reset but Kong Gateway versions < 3.10.0.6 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please set the enforce_latest_offset_reset field to false.
|
Confluent Consume plugin |
| D444 | warning |
For the ai-rate-limiting-advanced plugin, one or more instances have been configured with the decrease_by_fractions_in_redis field set to true. This field is not supported in Kong Gateway versions < 3.10.0.7, >= 3.11.0.0 and < 3.11.0.5, or >= 3.12.0.0 and < 3.12.0.1. The field has been removed in the data plane node.
|
Please set the decrease_by_fractions_in_redis field to false.
|
AI Rate Limiting Advanced plugin |
| D445 | warning |
For the vaults entity, one or more of the following schema fields are set: auth_method=jwt but Kong Gateway versions < 3.13.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Vault entity |
| D446 | warning |
For the vaults entity, one or more of the following schema fields are set: jwt_role, oauth2_token_endpoint, oauth2_client_id, oauth2_client_secret, oauth2_audiences but Kong Gateway versions < 3.13.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Vault entity |
| D447 | warning |
For the rate-limiting-advanced plugin, one or more of the following fields: identifier have been set to one or more of the following values: route but Kong Gateway versions < 3.13.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: ip. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Rate Limiting Advanced plugin |
| D448 | warning |
For plugins that supports Redis,the cloud_authentication field has been set. This is not supported in Kong Gateway versions < 3.13.0.0. The cloud_authentication field have been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
N/A |
| D449 | warning |
For the rate-limiting-advanced plugin, one or more instances are configured with compound_identifier field set to: route but Kong Gateway versions < 3.13.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Rate Limiting Advanced plugin |
| D450 | warning |
For the ai-aws-guardrails plugin, one or more of the following config fields are set: allow_masking but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI AWS Guardrails plugin |
| D451 | warning |
Plugin ai-lakera-guard is not available in Kong Gateway versions < 3.13.0.0.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Lakera Guard plugin |
| D452 | warning |
For the ai-proxy plugin, the provider xAI is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with xAI and the Grok AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy plugin |
| D453 | warning |
For the ai-request-transformer plugin, the provider xAI is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with xAI and the Grok AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Request Transformer plugin |
| D454 | warning |
For the ai-response-transformer plugin, the provider xAI is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with xAI and the Grok AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Response Transformer plugin |
| D455 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with model.provider field set to xai but Kong Gateway versions < 3.13.0.0 do not support this value. The impacted targets have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D456 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with route_type set to realtime/v1/realtime and a model.provider set to gemini but Kong Gateway versions < 3.13.0.0 do not support this value. The impacted targets have been changed to openai. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D459 | warning |
For the ai-proxy plugin, the provider Cerebras is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Cerebras AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy plugin |
| D460 | warning |
For the ai-request-transformer plugin, the provider Cerebras is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Cerebras AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Request Transformer plugin |
| D461 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: balancer.max_fails, balancer.fail_timeout but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D462 | warning |
For the ai-response-transformer plugin, the provider Cerebras is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Cerebras AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Response Transformer plugin |
| D463 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with model.provider field set to cerebras but Kong Gateway versions < 3.13.0.0 do not support this value. The impacted targets have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D464 | warning |
For the ai-sanitizer plugin, one or more of the following config fields are set: skip_logging_sanitized_items but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Sanitizer plugin |
| D465 | warning |
For the ai-rag-injector plugin, one or more of the following config fields are set: global_acl_config, collection_acl_config, max_filter_clauses, filter_mode, stop_on_filter_error, consumer_identifier but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI RAG Injector plugin |
| D469 | warning |
For the ai-mcp-proxy plugin, one or more tools have an input scheme where one or more of the parameters have in set to cookie, but Kong Gateway versions < 3.13.0.0 do not support this value. The impacted parameters have been removed from these tools. Because of this, features that rely on these parameters will not work as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI MCP Proxy plugin |
| D470 | warning |
For the ai-mcp-proxy plugin, one or more tools have a structured output response schema defined, but Kong Gateway versions < 3.13.0.0 do not support this. The response schema has been removed from these tools. Because of this, features that rely on these parameters will not work as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI MCP Proxy plugin |
| D472 | warning |
For the ai-proxy plugin, the provider Dashscope is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Dashscope AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy plugin |
| D473 | warning |
For the ai-request-transformer plugin, the provider Dashscope is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Dashscope AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Request Transformer plugin |
| D474 | warning |
For the ai-response-transformer plugin, the provider Dashscope is only compatible with Kong versions 3.13.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Dashscope AI models.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Response Transformer plugin |
| D475 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with model.provider field set to dashscope but Kong Gateway versions < 3.13.0.0 do not support this value. The impacted targets have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D477 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: target[].metadata but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D478 | warning |
For the ai-llm-as-judge plugin, one or more of the following config fields are set: llm.weight, llm.metadata, llm.description but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI LLM as Judge plugin |
| D479 | warning |
For the ai-rag-injector plugin, one or more of the following config fields are set: vectordb.threshold but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI RAG Injector plugin |
| D480 | warning |
Unsupported field ssl_verify for datakit call nodes
|
Remove the invalid field or upgrade the Kong Gateway to version 3.13.0.0 or above.
|
Plugins Datakit |
| D481 | warning |
For the mtls-auth plugin, one or more of the following config fields are set: ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
mTLS Authentication plugin |
| D482 | warning |
For the ai-aws-guardrails plugin, one or more of the following config fields are set: ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI AWS Guardrails plugin |
| D483 | warning |
For the jwt-signer plugin, one or more of the following config fields are set: access_token_endpoints_ssl_verify, channel_token_endpoints_ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
JWT Signer plugin |
| D484 | warning |
For the ai-azure-content-safety plugin, one or more of the following config fields are set: ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Azure Content Safety plugin |
| D485 | warning |
For the header-cert-auth plugin, one or more of the following config fields are set: ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Header Certificate Authentication plugin |
| D486 | warning |
For the openid-connect plugin, one or more of the following config fields are set: session_memcached_ssl, session_memcached_ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
OpenID Connect plugin |
| D487 | warning |
For the kafka-log plugin, one or more of the following config fields are set: security.ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Kafka Log plugin |
| D488 | warning |
For the kafka-consume plugin, one or more of the following config fields are set: security.ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Kafka Consume plugin |
| D489 | warning |
For the kafka-upstream plugin, one or more of the following config fields are set: security.ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Kafka Upstream plugin |
| D490 | warning | Bedrock provider does not support auth.allow_override=true in Gateway versions before 3.13.0.0. This configuration uses Bedrock with auth.allow_override=true which requires Gateway 3.13.0.0 or above. The value has been updated to false in order to preserve compatibility with older dataplane versions. The AI Proxy Plugin might not work as expected as a result. |
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy plugin |
| D491 | warning |
For the confluent-consume plugin, one or more of the following config fields are set: security but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Confluent Consume plugin |
| D492 | warning |
For the confluent plugin, one or more of the following config fields are set: security but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Confluent plugin |
| D493 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets[].model.options.dashscope but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D494 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.model.options.dashscope but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Request Transformer plugin |
| D495 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.model.options.dashscope but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Response Transformer plugin |
| D497 | warning |
For the oauth2-introspection plugin, the authorization_value config was found to contain a value matching the referenceable field format, but only Kong Gateway versions >= 3.6.0.0 support this field. Plugin features that rely on this field are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
OAuth 2.0 Introspection plugin |
| D498 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: model.options.bedrock.video_output_s3_uri but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D499 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with route_type field set to video/v1/videos/generations but Kong Gateway versions < 3.13.0.0 do not support this value. The impacted plugin has been removed. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| D502 | warning |
For the injection-protection plugin, one or more of the following fields: injection_types have been set to one or more of the following values: sql_low_sensitivity but Kong Gateway versions < 3.14.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: sql. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Injection Protection plugin |
| D503 | warning |
For the mtls-auth plugin, one or more of the following config fields are set: san_dirname_matcher but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
mTLS Authentication plugin |
| D504 | warning |
For the openid-connect plugin, one or more of the following config fields are set: jwks_endpoint, consumer_claims but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenID Connect plugin |
| D505 | warning |
For the json-threat-protection plugin, one or more of the following config fields are set: allow_non_json_requests but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
JSON Threat Protection plugin |
| D506 | warning |
For the oas-validation plugin, one or more of the following config fields are set: collect_all_errors but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
OAS Validation plugin |
| D507 | warning |
For the ai-mcp-oauth2 plugin, one or more of the following config fields are set: passthrough_credentials but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP OAuth2 plugin |
| D508 | warning |
For the ai-mcp-oauth2 plugin, one or more of the following config fields are set: consumer_claim, consumer_by, consumer_optional, consumer_groups_claim, consumer_groups_optional but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP OAuth2 plugin |
| D510 | warning |
Datakit nodes of type call require url field.
|
Add a url field to the configuration or update the Kong Gatewaut to version 3.13.0.0 or above
|
Plugins Datakit |
| D511 | warning |
Unsupported input fields for call node.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Plugins Datakit |
| D512 | warning | Datakit property setter for Kong Consumer. |
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Plugins Datakit |
| D513 | warning |
For the solace-upstream plugin, one or more of the following config fields are set: message.content_type, message.content_encoding, message.user_properties, message.forward_body_raw_only but Kong Gateway versions < 3.14.0.0 do not support these fields and have been removed. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Solace Upstream plugin |
| D515 | warning |
Plugin ai-a2a-proxy is not available in Kong Gateway versions < 3.14.0.0.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI A2A Proxy plugin |
| D516 | warning |
Plugin ai-custom-guardrail is not available in Kong Gateway versions < 3.14.0.0.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Custom Guardrail plugin |
| D517 | warning |
For the openid-connect plugin, one or more of the following config fields are set: token_exchange but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenID Connect plugin |
| D518 | warning |
For the mtls-auth plugin, the protocols field includes one of: ws, wss. This is not supported in Kong Gateway versions < 3.14.0.0. To avoid a security risk, the configuration has not been propagated to the data plane node. Please upgrade the data plane node or remove the unsupported protocols from the plugin configuration.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
mTLS Auth plugin |
| D519 | warning |
For the ai-mcp-proxy plugin, one or more of the following config fields are set: acl_attribute_type, access_token_claim_field but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP Proxy plugin |
| D520 | warning |
For any jwt-signer plugin, if the config.access_token_keyset or config.channel_token_keyset fields are not set, they have been updated to kong. Some features of the jwt-signer plugin may not work as expected without these fields being set.
|
Properly configure a valid keyset URL for both config.access_token_keyset and config.channel_token_keyset.
|
JWT Signer plugin |
| D521 | warning |
For the ai-request-transformer plugin, the provider DeepSeek is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with DeepSeek AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Request Transformer plugin |
| D522 | warning |
For the ai-response-transformer plugin, the provider DeepSeek is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with DeepSeek AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Response Transformer plugin |
| D523 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with model.provider field set to deepseek but Kong Gateway versions < 3.14.0.0 do not support this value. The impacted targets have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| D524 | warning |
For the ai-rate-limiting-advanced plugin, one or more instances have been configured with policies mode by filling the config.policies field. This is not supported in Kong Gateway versions < 3.14.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| D525 | warning |
For the ai-sanitizer plugin, one or more of the following config fields are set: allow_all_conversation_history but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Sanitizer plugin |
| D526 | warning |
For the Plugin entity, the condition field has been set but Kong Gateway versions < 3.14.0.0 do not support conditional plugin execution. The condition field has been removed from the configuration; the plugin will execute unconditionally.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Plugin entity |
| D528 | warning |
For the openid-connect plugin, the protocols field includes one of: ws, wss. This is not supported in Kong Gateway versions < 3.14.0.0. To avoid a security risk, the configuration has not been propagated to the data plane node. Please upgrade the data plane node or remove the unsupported protocols from the plugin configuration.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenID Connect plugin |
| D532 | warning |
For the vaults entity, one or more of the following schema fields are set: auth_method=gcp_iam, auth_method=gcp_gce, auth_method=azure, auth_method=aws_ec2, auth_method=aws_iam but Kong Gateway versions < 3.14.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Vaults entity |
| D533 | warning |
For the vaults entity, one or more of the following schema fields are set: gcp_auth_role, gcp_service_account, gcp_jwt_exp, gcp_login_path but Kong Gateway versions < 3.14.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Vaults entity |
| D534 | warning |
For the vaults entity, one or more of the following schema fields are set: azure_auth_role, azure_login_path but Kong Gateway versions < 3.14.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Vaults entity |
| D535 | warning |
For the vaults entity, one or more of the following schema fields are set: aws_auth_role, aws_auth_region, aws_auth_nonce, aws_access_key_id, aws_secret_access_key, aws_login_path, aws_sts_endpoint_url, aws_assume_role_arn, aws_role_session_name but Kong Gateway versions < 3.14.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Vaults entity |
| D536 | warning |
For the vaults entity, one or more of the following schema fields are set: ssl_verify but Kong Gateway versions < 3.14.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Vaults entity |
| D537 | warning |
For the ai-mcp-oauth2 plugin, one or more of the following config fields are set: metadata_discovery_endpoint, jwks_endpoint, jwks_cache_ttl, metadata_cache_ttl, metadata_discovery_retry, jwt_claims_leeway but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP OAuth2 plugin |
| D538 | warning |
For the ai-mcp-oauth2 plugin, Kong Gateway versions < 3.14.0.0 require config.introspection_endpoint and config.client_id. When they are missing, compatibility injects placeholder values to keep the configuration valid for older data planes.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP OAuth2 plugin |
| D539 | warning |
For the ai-proxy plugin, the provider vLLM is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with vLLM models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy plugin |
| D540 | warning |
For the ai-request-transformer plugin, the provider vLLM is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with vLLM models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Request Transformer plugin |
| D541 | warning |
For the ai-response-transformer plugin, the provider vLLM is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with vLLM models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Response Transformer plugin |
| D542 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with model.provider field set to vllm but Kong Gateway versions < 3.14.0.0 do not support this value. The impacted targets have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| D543 | warning |
For the ai-proxy plugin, the provider Databricks is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Databricks AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy plugin |
| D544 | warning |
For the ai-request-transformer plugin, the provider Databricks is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Databricks AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Request Transformer plugin |
| D545 | warning |
For the ai-response-transformer plugin, the provider Databricks is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with Databricks AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Response Transformer plugin |
| D546 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with model.provider field set to databricks but Kong Gateway versions < 3.14.0.0 do not support this value. The impacted targets have been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| D547 | warning |
For the ai-gcp-model-armor plugin, one or more of the following config fields are set: log_blocked_content but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI GCP Model Armor plugin |
| D548 | warning |
For the ai-aws-guardrails plugin, one or more of the following config fields are set: log_blocked_content but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI AWS Guardrails plugin |
| D549 | warning |
For the ai-azure-content-safety plugin, one or more of the following config fields are set: log_blocked_content but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Azure Content Safety plugin |
| D550 | warning |
For the ai-lakera-guard plugin, one or more of the following config fields are set: log_blocked_content but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Lakera Guard plugin |
| D551 | warning |
For the ai-mcp-proxy plugin, one or more of the following config fields are set: server.session but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP Proxy plugin |
| D552 | warning |
For the ai-gcp-model-armor plugin, one or more of the following config fields are set: gcp_oauth_token_url, gcp_metadata_url but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI GCP Model Armor plugin |
| D553 | warning |
For the ai-mcp-oauth2 plugin, one or more of the following config fields are
set: credential_claim but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP OAuth2 plugin |
| D554 | warning |
For the ai-proxy-advanced plugin, one or more targets are configured with route_type set to llm/v1/batches for provider anthropic, bedrock, or gemini. Kong Gateway versions >= 3.11.0.0 < 3.14.0.0 do not support batch processing for these providers. The route_type has been changed to llm/v1/chat.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| D555 | warning |
Plugin metering-and-billing is not available in Kong Gateway versions < 3.14.0.0.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Metering and Billing plugin |
| D556 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets[].model.model_alias but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| D557 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.model.options.databricks but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Request Transformer plugin |
| D558 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.model.options.databricks but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Response Transformer plugin |
| D559 | warning |
For the ai-mcp-oauth2 plugin, one or more of the following config fields are set: upstream_headers but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP OAuth2 plugin |
| D560 | warning |
For the openid-connect plugin, one or more of the following config fields are set: upstream_headers, downstream_headers but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenID Connect plugin |
| D562 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets[].model.options.databricks but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
[] |
| D563 | warning |
For the ai-proxy plugin, the provider DeepSeek is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to OpenAI which provides best-effort compatibility with DeepSeek AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy plugin |
| D564 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.databricks but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy plugin |
| D565 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: acls but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| D566 | warning |
For the openid-connect plugin, config.redis.sentinel_username and config.redis.sentinel_password are not recognized by this version of Kong Gateway for Redis Sentinel authentication. The values have been moved to config.redis.username and config.redis.password for compatibility. Upgrade to Kong Gateway 3.10.0.8 (3.10), 3.11.0.7 (3.11), 3.12.0.3 (3.12), 3.13.0.3 (3.13), or 3.14.0.0+ to use the dedicated fields.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenID Connect plugin |
| D567 | warning |
For the openid-connect plugin, config.redis.username and config.redis.password were being used as Redis Sentinel credentials by older versions of Kong Gateway. The values have been moved to config.redis.sentinel_username and config.redis.sentinel_password to preserve existing sentinel authentication behaviour on this data plane.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenID Connect plugin |
| D568 | warning |
For the openid-connect plugin, config.session_redis_username and config.session_redis_password have been removed because Redis Sentinel mode does not support separate per-node credentials on this version of Kong Gateway. Upgrade to Kong Gateway 3.10.0.8 (3.10), 3.11.0.7 (3.11), 3.12.0.3 (3.12), 3.13.0.3 (3.13), or 3.14.0.0+ to use the dedicated fields.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenID Connect plugin |
| D569 | warning |
For the ai-proxy-advanced plugin, one or more of the following config fields are set: targets[].auth.gcp_oauth_token_url, targets[].auth.gcp_metadata_url but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| D570 | warning |
For the ai-semantic-prompt-guard plugin, config.max_request_body_size is not supported in Kong Gateway versions < 3.13.0.0. When set to a non-zero value, the field has been moved to config.rules.max_request_body_size in the data plane node.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| EOL100 | error | Kong Gateway version 2.5.x.x has now reached its End of Sunset Support, and after July 31, 2024, data plane connections for this version will no longer receive configurations from Konnect. | To ensure continued Konnect support, please upgrade to the latest 2.8 LTS version. | Compatibility |
| EOL101 | error | Kong Gateway version 2.6.x.x has now reached its End of Full Support, and after July 31, 2024, data plane connections for this version will no longer receive configurations from Konnect. | To ensure continued Konnect support, please upgrade to the latest 2.8 LTS version. | Compatibility |
| EOL102 | error | Kong Gateway version 2.7.x.x has now reached its End of Full Support, and after July 31, 2024, data plane connections for this version will no longer receive configurations from Konnect. | To ensure continued Konnect support, please upgrade to the latest 2.8 LTS version. | Compatibility |
| EOL103 | error | Kong Gateway version 3.0.x.x has now reached its End of Full Support, and after July 31, 2024, data plane connections for this version will no longer receive configurations from Konnect. | To ensure continued Konnect support, please upgrade to the latest 3.4 LTS version. | Compatibility |
| EOL104 | error | Kong Gateway version 3.1.x.x has now reached its End of Full Support, and after July 31, 2024, data plane connections for this version will no longer receive configurations from Konnect. | To ensure continued Konnect support, please upgrade to the latest 3.4 LTS version. | Compatibility |
| EOL105 | error | Kong Gateway version 3.2.x.x has now reached its End of Full Support, and after July 31, 2024, data plane connections for this version will no longer receive configurations from Konnect. | To ensure continued Konnect support, please upgrade to the latest 3.4 LTS version. | Compatibility |
| EOL106 | error | Kong Gateway version 3.3.x.x has now reached its End of Full Support, and after July 31, 2024, data plane connections for this version will no longer receive configurations from Konnect. | To ensure continued Konnect support, please upgrade to the latest 3.4 LTS version. | Compatibility |
| EOL107 | error | Kong Gateway version 3.5.x.x has now reached its End of Full Support, and after Dec 1, 2024, data plane connections for this version will no longer receive configurations from Konnect. | To ensure continued Konnect support, please upgrade to the latest 3.10 LTS version. | Compatibility |
| P001 | error | Kong data plane nodes running OSS versions are not supported on the Konnect platform and will not receive any traffic. | Reconnect the data plane node using the Kong Enterprise version. | N/A |
| P101 | warning |
For the acme plugin, one or more of the following config fields are set: preferred_chain, storage_config.vault.auth_method, storage_config.vault.auth_path, storage_config.vault.auth_role, storage_config.vault.jwt_path but Kong Gateway versions < 2.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
ACME plugin |
| P102 | warning |
For the aws-lambda plugin, one or more of the following config fields are set: base64_encode_body but Kong Gateway versions < 2.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
AWS Lambda plugin |
| P103 | warning |
For the grpc-web plugin, one or more of the following config fields are set: allow_origin_header but Kong Gateway versions < 2.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
gRPC Web plugin |
| P104 | warning |
For the request-termination plugin, one or more of the following config fields are set: echo, trigger but Kong Gateway versions < 2.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.6.0.0 or above.
|
Request Termination plugin |
| P105 | warning |
For the datadog plugin, one or more of the following config fields are set: service_name_tag, status_tag, consumer_tag but Kong Gateway versions < 2.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Datadog plugin |
| P106 | warning |
For the datadog plugin, distribution metric type is not supported in Kong gateway versions < 2.7.0.0. Distribution metrics will not be emitted by the gateway.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Datadog plugin |
| P107 | warning |
For the ip-restriction plugin, one or more of the following config fields are set: status, message but Kong Gateway versions < 2.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
IP Restriction plugin |
| P108 | warning |
For the rate-limiting plugin, one or more of the following config fields are set: redis_ssl, redis_ssl_verify, redis_server_name but Kong Gateway versions < 2.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Rate Limiting plugin |
| P109 | warning |
For the zipkin plugin, one or more of the following fields: header_type have been set to one or more of the following values: ignore but Kong Gateway versions < 2.7.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Zipkin plugin |
| P110 | warning |
For the zipkin plugin, one or more of the following config fields are set: local_service_name but Kong Gateway versions < 2.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Zipkin plugin |
| P111 | warning |
For the acme plugin, one or more of the following config fields are set: rsa_key_size but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
ACME plugin |
| P112 | warning |
For the rate-limiting plugin, one or more of the following config fields are set: redis_username, redis.username but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Rate Limiting plugin |
| P113 | warning |
For the response-ratelimiting plugin, one or more of the following config fields are set: redis_username, redis.username but Kong Gateway versions < 2.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.0.0 or above.
|
Response Rate Limiting plugin |
| P115 | warning |
Plugin opentelemetry is not available in Kong Gateway versions < 3.0.0.0.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
OpenTelemetry plugin |
| P116 | warning |
For the zipkin plugin, one or more of the following config fields are set: http_span_name, connect_timeout, send_timeout, read_timeout but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Zipkin plugin |
| P117 | warning |
For the prometheus plugin, one or more of the following config fields are set: status_code_metrics, latency_metrics, bandwidth_metrics, upstream_health_metrics but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Prometheus plugin |
| P118 | warning |
For the acme plugin, one or more of the following config fields are set: allow_any_domain but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
ACME plugin |
| P119 | warning |
For the Service entity, enabled field has been set to true but Kong Gateway versions < 2.7.0.0 do not support this feature. The Service has been left enabled in the Kong Gateway, and the traffic for the Service is being routed by Kong Gateway. This is a critical error and may result in unwanted traffic being routed to the upstream Services via Kong Gateway.
|
Please upgrade Kong Gateway to version 2.7.0.0 or above.
|
Services entity |
| P120 | warning |
For the aws-lambda plugin, one or more of the following config fields are set: proxy_scheme but Kong Gateway versions >= 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please use config.proxy_url instead of config.proxy_scheme field.
|
AWS Lambda plugin |
| P121 | warning |
For the aws-lambda plugin, config.aws_region and config.host fields are set. These fields were mutually exclusive for Kong gateway versions < 3.0.0.0. The plugin configuration has been changed to remove the config.host field.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
AWS Lambda plugin |
| P122 | warning |
For the pre-function plugin, config.functions field has been used. This is not supported in Kong Gateway versions >= 3.0.0.0. The plugin configuration has been updated to rename config.functions to config.access in the data-plane.
|
Please update the configuration to use config.access field instead of config.functions.
|
Pre-function plugin |
| P123 | warning |
For the post-function plugin, config.functions field has been used. This is not supported in Kong Gateway versions >= 3.0.0.0. The plugin configuration has been updated to rename config.functions to config.access in the data-plane.
|
Please update the configuration to use config.access field instead of config.functions.
|
Post-function plugin |
| P124 | warning |
For the pre-function plugin, config.functions field has been used. This field is deprecated and it is no longer supported in Kong Gateway versions >= 3.0.0.0.
|
Please update the plugin configuration to use config.access field in place of config.functions field
|
Pre-function plugin |
| P125 | warning |
For the post-function plugin, config.functions field has been used. This field is deprecated and it is no longer supported in Kong Gateway versions >= 3.0.0.0.
|
Please update the plugin configuration to use config.access field in place of config.functions field
|
Post-function plugin |
| P126 | warning |
For the upstream entity, one or more of the following schema fields are set: hash_on_query_arg, hash_fallback_query_arg, hash_on_uri_capture, hash_fallback_uri_capture but Kong Gateway versions < 3.0.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Upstreams entity |
| P127 | warning |
For the upstreams entity, one or more of the hash_on, hash_fallback schema fields are set with one of the following values: path, query_arg, uri_capture, but Kong Gateway versions < 3.0.0.0 do not support these values. Because of this, hash_on and hash_fallback'have been changed in the data plane node to none` and hashing is not working as expected.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Upstreams entity |
| P128 | warning |
For the paths field used in route a regex pattern usage was detected. This field has been back-ported by stripping the prefix ~. Routes which rely on regex parsing may not work as intended on Kong gateway versions < 3.0.0.0. If upgrading to version 3.0.0.0 is not possible, using paths without the ~ prefix will avoid this warning.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Routes entity |
| P129 | warning |
For the paths field used in route a regex pattern usage was detected. Kong gateway versions 3.0.0.0 and above require that regular expressions start with a ~ character to distinguish from simple prefix match.
|
To define a regular expression based path for routing, please prefix the path with ~ character. | Routes entity |
| P130 | warning |
For the statsd plugin, one or more of the following metrics are being used: shdict_usage, status_count_per_user_per_route, status_count_per_workspace, but Kong Gateway versions < 3.0.0.0 do not support these. These metrics have been removed from the statsd plugin configuration and features that rely on them are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
StatsD plugin |
| P131 | warning |
For the statsd plugin, one or more metrics have one or more of the following fields set: workspace_identifier, service_identifier. These fields are unsupported in Kong Gateway versions < 3.0.0.0 and have been removed. Features that rely on these removed fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
StatsD plugin |
| P132 | warning |
For the statsd plugin, one or more metrics don’t have the consumer_identifier field set. For these metrics, the value of the consumer_identifier field has been set to custom_id.
|
Explicitly set the consumer_identifier field for all metrics or upgrade Kong Gateway to a version >= 3.0.0.0.
|
StatsD plugin |
| P133 | warning |
For the statsd plugin, one or more of the following config fields are set: allow_status_codes, udp_packet_size, use_tcp, hostname_in_prefix, consumer_identifier_default, service_identifier_default, workspace_identifier_default but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
StatsD plugin |
| P134 | warning |
Tags that contain space characters ( ) are not supported on Kong gateway versions < 3.0.0.0. As such, all tag values that contain space characters have been removed.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Tags |
| P135 | warning |
The vaults entity is being used, but Kong Gateway versions < 3.1.0.0 do not support this entity.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Vaults entity |
| P136 | warning |
For the zipkin plugin, one or more of the following config fields are set: http_response_header_for_traceid but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Zipkin plugin |
| P137 | warning |
For the rate-limiting plugin, one or more of the following config fields are set: error_code, error_message but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Rate Limiting plugin |
| P138 | warning |
For the acme plugin, one or more of the following config fields are set: storage_config.redis.ssl, storage_config.redis.ssl_verify, storage_config.redis.ssl_server_name, storage_config.redis.server_name but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
ACME plugin |
| P139 | warning |
For the response-ratelimiting plugin, one or more of the following config fields are set: redis_ssl, redis_ssl_verify, redis_server_name, redis.ssl, redis.ssl_verify, redis.server_name but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Response Rate Limiting plugin |
| P140 | warning |
For the aws-lambda plugin, one or more of the following config fields are set: aws_assume_role_arn, aws_role_session_name but Kong Gateway versions < 2.8.1.3 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 2.8.1.3 or above.
|
AWS Lambda plugin |
| P141 | warning |
The keys entity is being used, but Kong Gateway versions < 3.1.0.0 do not support this entity.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Keys entity |
| P142 | warning |
The key_sets entity is being used, but Kong Gateway versions < 3.1.0.0 do not support this entity.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Keys entity |
| P144 | warning |
For the pre-function plugin, one or more of the following config fields are set: ws_handshake, ws_client_frame, ws_upstream_frame, ws_close but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Pre-function plugin |
| P145 | warning |
For the post-function plugin, one or more of the following config fields are set: ws_handshake, ws_client_frame, ws_upstream_frame, ws_close but Kong Gateway versions < 3.0.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Post-function plugin |
| P146 | warning |
For the acme plugin, one or more of the following config fields are set: enable_ipv4_common_name but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
ACME plugin |
| P147 | warning |
For the datadog plugin, one or more of the following config fields are set: retry_count, queue_size, flush_timeout but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Datadog plugin |
| P148 | warning |
For the session plugin, one or more of the following config fields are set: cookie_persistent but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Session plugin |
| P149 | warning |
For the plugin entity, one or more of the following schema fields are set: instance_name but Kong Gateway versions < 3.2.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Plugins entity |
| P150 | warning |
For the zipkin plugin, one or more of the following config fields are set: phase_duration_flavor but Kong Gateway versions < 3.2.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Zipkin plugin |
| P151 | warning |
For the upstreams entity, the algorithm field is set to latency but Kong Gateway versions < 3.2.0.0 do not support this value. Because of this, algorithm has been set to the default value round-robin and features depending on the latency algorithm may not work as expected.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Upstreams entity |
| P152 | warning |
For the statsd plugin, one or more of the following config fields are set: retry_count, queue_size, flush_timeout but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
StatsD plugin |
| P153 | warning |
For the statsd plugin, one or more of the following config fields are set: tag_style but Kong Gateway versions < 3.2.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
StatsD plugin |
| P154 | warning |
For the statsd plugin, one or more default metrics have been configured with a non-default stat_type. This is not supported in Kong Gateway versions < 3.1.0.0.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
StatsD plugin |
| P155 | warning |
For the session plugin, one or more of the following config fields are set: audience, absolute_timeout, remember_cookie_name, remember_rolling_timeout, remember_absolute_timeout, response_headers, request_headers but Kong Gateway versions < 3.2.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Session plugin |
| P156 | warning |
For the session plugin, one or more config fields are set but Kong Gateway versions < 3.2.0.0 do not support these fields. The plugin configuration has been updated and these fields have been mapped to their old names: rolling_timeout => cookie_lifetime, idling_timeout => cookie_idletime, stale_ttl => cookie_discard, cookie_same_site => cookie_samesite, cookie_http_only => cookie_httponly
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Session plugin |
| P157 | warning |
For the session plugin, one or more of the following config fields are set: cookie_renew but Kong Gateway versions >= 3.2.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please remove these fields from the plugin configuration. | Session plugin |
| P158 | warning |
For the session plugin, one or more config fields are set but Kong Gateway versions < 3.2.0.0 do not support these fields. The plugin configuration has been updated and these fields have been mapped to their old names: remember => cookie_persistent
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Session plugin |
| P159 | warning |
For the session plugin, one or more of the following config fields are set: remember but Kong Gateway versions < 3.1.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please remove these fields from the plugin configuration. | Session plugin |
| P160 | warning |
For the session plugin, config.cookie_same_site has been set to Default. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin configuration has been changed to the config.cookie_same_site=Lax in the data-plane (default value).
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Session plugin |
| P161 | warning |
For the aws-lambda plugin, the following config field is set: aws_imds_protocol_version, but Kong Gateway versions <2.8.3.0 and >=3.0.0.0,<3.2.0.0 do not support it. Plugin features that rely on this field are not working as intended.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
AWS Lambda plugin |
| P162 | warning |
For the opentelemetry plugin, instances have been configured on a specific service, route, or consumer. This is not supported in Kong Gateway versions < 3.2.0.0. The plugin has been removed in the data-plane.
|
Unset the service, route, and consumer fields for the plugin, or upgrade Kong Gateway to a version >= 3.2.0.0.
|
OpenTelemetry plugin |
| P163 | warning |
For the graphql-rate-limiting-advanced plugin on Kong Gateway versions <3.2.0.0, the cluster option is not supported on hybrid mode. The plugin instance has been removed to avoid system crashes.
|
Please upgrade to Kong Gateway 3.2.0.0 or later, which supports the cluster mode with the sync_rate = -1 option, or change to the redis mode.
|
Graphql Rate Limiting Advanced plugin |
| P164 | warning |
For the datadog plugin, one or more of the following config fields are set: retry_count, queue_size, flush_timeout but Kong Gateway versions >= 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Starting with version 3.3.0.0, the plugin datadog uses the field queue instead of retry_count, queue_size, flush_timeout used previously. Please update the configuration to use the new fields.
|
Datadog plugin |
| P165 | warning |
For the datadog plugin, one or more of the following config fields are set: queue but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
Datadog plugin |
| P166 | warning |
For the http-log plugin, one or more of the following config fields are set: retry_count, queue_size, flush_timeout but Kong Gateway versions >= 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Starting with version 3.3.0.0, the plugin http-log uses the field queue instead of retry_count, queue_size, flush_timeout used previously. Please update the configuration to use the new fields.
|
Http Log plugin |
| P167 | warning |
For the http-log plugin, one or more of the following config fields are set: queue but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
Http Log plugin |
| P168 | warning |
For the statsd plugin, one or more of the following config fields are set: retry_count, queue_size, flush_timeout but Kong Gateway versions >= 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Starting with version 3.3.0.0, the plugin statsd uses the field queue instead of retry_count, queue_size, flush_timeout used previously. Please update the configuration to use the new fields.
|
StatsD plugin |
| P169 | warning |
For the statsd plugin, one or more of the following config fields are set: queue but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
StatsD plugin |
| P170 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: batch_span_count, batch_flush_delay but Kong Gateway versions >= 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Starting with version 3.3.0.0, the plugin opentelemetry uses the field queue instead of batch_span_count, batch_flush_delay used previously. Please update the configuration to use the new fields.
|
OpenTelemetry plugin |
| P171 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: queue but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
OpenTelemetry plugin |
| P172 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: header_type but Kong Gateway versions >= 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
OpenTelemetry plugin |
| P173 | warning |
For the acme plugin, one or more of the following config fields are set: account_key, storage_config.redis.namespace but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
ACME plugin |
| P174 | warning |
For the proxy-cache plugin, one or more of the following config fields are set: ignore_uri_case but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
Proxy Cache plugin |
| P175 | warning |
For the aws-lambda plugin, one or more of the following config fields are set: disable_https but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
AWS Lambda plugin |
| P176 | warning |
For the datadog plugin, one or more of the following config fields are set: queue but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
Datadog plugin |
| P177 | warning |
For the statsd plugin, one or more of the following config fields are set: queue but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
StatsD plugin |
| P178 | warning |
For the http-log plugin, the config.content_type field has been set to application/json; charset=utf-8. This is not supported in Kong Gateway versions < 3.3.0.0. The plugin configuration has been changed to config.content_type=application/json in the data-plane.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
Http Log plugin |
| P179 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: http_response_header_for_traceid but Kong Gateway versions >= 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
OpenTelemetry plugin |
| P180 | warning |
For the zipkin plugin, one or more of the following config fields are set: queue but Kong Gateway versions < 3.3.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
Zipkin plugin |
| P181 | warning |
For the zipkin plugin, one or more of the following fields: header_type, default_header_type have been set to one or more of the following values: datadog but Kong Gateway versions < 3.0.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve, b3. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Zipkin plugin |
| P182 | warning |
For the upstream entity, one or more of the following schema fields are set: use_srv_name but Kong Gateway versions < 3.1.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Upstreams entity |
| P183 | warning |
For the upstream entity, one or more of the following schema fields are set: healthchecks.active.headers but Kong Gateway versions < 3.0.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.0.0.0 or above.
|
Upstreams entity |
| P184 | warning |
For the vault entity, one or more of the following schema fields are set: config.ttl, config.neg_ttl, config.resurrect_ttl but Kong Gateway versions < 3.4.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
Vaults entity |
| P185 | warning |
For the rate-limiting plugin, one or more of the following config fields are set: sync_rate but Kong Gateway versions < 3.4.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
Rate Limiting plugin |
| P186 | warning |
For the opentelemetry plugin, one or more of the following fields: header_type have been set to one or more of the following values: aws but Kong Gateway versions < 3.4.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
OpenTelemetry plugin |
| P187 | warning |
For the zipkin plugin, one or more of the following fields: header_type, default_header_type have been set to one or more of the following values: aws but Kong Gateway versions < 3.4.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve, b3. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
Zipkin plugin |
| P188 | warning |
For the ip-restriction plugin, the protocols array contains one or both of: TLS, TCP. This is not supported in Kong Gateway versions < 3.4.0.0. These values have been removed and plugin features that rely on these values are not working as intended. If TLS and/or TCP were the only values, then protocols has been reset to the default values of [HTTP, HTTPS, GRPC, GRPCS].
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
IP Restriction plugin |
| P189 | warning | Kong Gateway versions >= 3.1.0.0 and < 3.1.1.2 only support the wRPC protocol which has been removed from Kong Gateway >= 3.2.0.0. Konnect will be removing support for these releases of Kong Gateway on 2023/09/30. After this date these versions of Kong Gateway will no longer be able to establish connections with Konnect and will not receive configuration changes. You may upgrade to Kong Gateway >= 3.1.1.2; however Kong recommends upgrading to Kong Gateway 3.4.0.0 LTS. |
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
N/A |
| P190 | warning |
For the vaults entity, the prefix value contains hyphens. This is not supported in Kong Gateway versions < 3.3.0.0. Hyphens have been converted to underscores.
|
Update prefix values to use underscores instead of hyphens, or upgrade to Kong Gateway versions >= 3.3.0.0 which automatically convert hyphens to underscores. | Vaults entity |
| P191 | error |
One or more certificates have expired. Resources that use an expired certificate are not behaving as expected. Data planes >= v3.2.0.0 will receive configuration updates but the data plane will fail to process them and will be Out of Sync until this is corrected. Data planes < v3.2.0.0 may be inoperable.
|
Remove or replace expired certificates. | Renew Certificate |
| P192 | warning |
For the response-ratelimiting plugin, one or more of the following config fields are set in a reference format: redis_password, redis_username but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Response Rate Limiting plugin |
| P193 | warning |
For the session plugin, one or more of the following config fields are set in a reference format: secret but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Session plugin |
| P194 | warning |
For the rate-limiting plugin, one or more of the following config fields are set in a reference format: redis_password, redis_username but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Rate Limiting plugin |
| P195 | warning |
For the loggly plugin, one or more of the following config fields are set in a reference format: key but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Loggly plugin |
| P196 | warning |
For the acme plugin, one or more of the following config fields are set in a reference format: account_email, eab_kid, eab_hmac_key, storage_config.redis.auth, storage_config.consul.token but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
ACME plugin |
| P197 | warning |
For the aws-lambda plugin, one or more of the following config fields are set in a reference format: aws_key, aws_secret, aws_assume_role_arn but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
AWS Lambda plugin |
| P198 | warning |
For the azure-functions plugin, one or more of the following config fields are set in a reference format: apikey, clientid but Konnect only supports Vaults starting from Kong Gateway version 3.1.0.0. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
Azure Functions plugin |
| P199 | warning |
For the datadog plugin, one or more of the following config fields are set in a reference format: host but Kong Gateway versions < 3.3.0.0 do not support the reference format for these fields. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.3.0.0 or above.
|
Datadog plugin |
| P200 | warning |
For the http-log plugin, one or more of the following config fields are set in a reference format: http_endpoint, headers but Kong Gateway versions < 3.2.0.0 do not support the reference format for these fields. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.2.0.0 or above.
|
Http Log plugin |
| P201 | warning |
For the opentelemetry plugin, one or more of the following config fields are set in a reference format: headers but Kong Gateway versions < 3.1.0.0 do not support the reference format for these fields. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.1.0.0 or above.
|
OpenTelemetry plugin |
| P202 | warning |
For the opentelemetry plugin, one or more of the following config fields are set in a reference format: endpoint but Kong Gateway versions < 3.4.0.0 do not support the reference format for these fields. This plugin instance will cause the Kong Gateway to fail payload validation, causing payload updates to fail and potentially getting the data plane into an out-of-sync state.
|
Please upgrade Kong Gateway to version 3.4.0.0 or above.
|
OpenTelemetry plugin |
| P203 | warning |
For the opentelemetry plugin, one or more of the following fields: header_type have been set to one or more of the following values: datadog but Kong Gateway versions < 3.4.1.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.4.1.0 or above.
|
OpenTelemetry plugin |
| P204 | warning |
For the acme plugin, one or more of the following config fields are set: storage_config.redis.scan_count but Kong Gateway versions < 3.5.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
ACME plugin |
| P205 | warning |
For the proxy-cache plugin, one or more of the following config fields are set: response_headers but Kong Gateway versions < 3.5.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
Proxy Cache plugin |
| P206 | warning |
For the cors plugin, one or more of the following config fields are set: private_network but Kong Gateway versions < 3.5.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
Cors plugin |
| P207 | warning |
For the opentelemetry plugin, one or more of the following fields: header_type have been set to one or more of the following values: gcp but Kong Gateway versions < 3.5.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
OpenTelemetry plugin |
| P208 | warning |
For the zipkin plugin, one or more of the following fields: header_type, default_header_type have been set to one or more of the following values: gcp but Kong Gateway versions < 3.4.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve, b3. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
Zipkin plugin |
| P209 | warning |
For the vault entity, one or more of the following schema fields are set: endpoint_url, assume_role_arn, role_session_name but Kong Gateway versions < 3.4.3.5 do not support these fields.
|
Please upgrade Kong Gateway to version 3.4.3.5 or above.
|
Vaults entity |
| P210 | warning |
For the vault entity, the config contains one or more Azure vault entity. This is not supported in Kong Gateway versions < 3.4.3.5. The impacted configuration has been removed from the vault entity.
|
Please upgrade Kong Gateway to version 3.4.3.5 or above.
|
Vaults entity |
| P211 | warning |
For the session plugin, one or more of the following config fields are set: read_body_for_logout but Kong Gateway versions < 3.5.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
Session plugin |
| P212 | warning |
For the vault entity, one or more of the following schema fields are set: kube_auth_path but Kong Gateway versions < 3.4.3.4 do not support these fields.
|
Please upgrade Kong Gateway to version 3.4.3.4 or above.
|
Vaults entity |
| P213 | warning |
One or more services have been configured with an underscore in the host field. This is only supported for Kong Gateway parity and it is not compliant with RFC0952.
|
Remove underscores in services host field.
|
Services entity |
| P214 | warning | The priority exceeds the value of 2^46, which may cause loss of precision in the Data Plane Node. |
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
N/A |
| P215 | error |
Recursive OpenAPI specification found in the oas-validation plugin configuration. The api_spec must not have recursive elements for data plane nodes < 3.5.0.0; this data plane node will be inoperable.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
OAS Validation plugin |
| P216 | warning |
The filter_chains entity is being used, but Kong Gateway versions < 3.5.0.0 do not support this entity.
|
Please upgrade Kong Gateway to version 3.5.0.0 or above.
|
N/A |
| P217 | warning |
For the ip-restriction plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.6.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
IP Restriction plugin |
| P218 | warning |
For the proxy-cache plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.6.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Proxy Cache plugin |
| P219 | warning |
For the rate-limiting plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.6.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Rate Limiting plugin |
| P220 | warning |
For the request-termination plugin, instances have been configured on a specific consumer_group. This is not supported in Kong Gateway versions < 3.6.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Request Termination plugin |
| P221 | warning |
For the acl plugin, one or more of the following config fields are set: include_consumer_groups but Kong Gateway versions < 3.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
ACL plugin |
| P222 | warning |
For the session plugin, one or more of the following config fields are set: sampling_rate but Kong Gateway versions < 3.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
OpenTelemetry plugin |
| P223 | warning | One or more filter chain entities have been configured, but wasm support is not enabled on one or more data plane nodes. Filter chains are not behaving as expected and the data plane may be inoperable. | Enable wasm support on all data plane nodes or remove filter chain entities from the config. | Proxy-Wasm filter configuration |
| P224 | warning |
Plugin ai-proxy is not available in Kong Gateway versions < 3.6.0.0.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
AI Proxy plugin |
| P225 | warning |
For the rate-limiting plugin, limit_by has been set to consumer-group. This is not supported in Kong Gateway versions < 3.6.0.0. Impacted field has been updated to its default value: limit_by=consumer
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Rate Limiting plugin |
| P226 | warning |
For the vault entity, one or more instances are configured with HCV approle settings.This is not supported in Kong Gateway versions < 3.6.0.0.The impacted vault instances have been removed from the configuration. Because of this, features that rely on these vaults are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Vaults entity |
| P227 | warning |
Plugin ai-prompt-template is not available in Kong Gateway versions < 3.6.0.0.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
AI Prompt Template plugin |
| P228 | warning |
Plugin ai-prompt-decorator is not available in Kong Gateway versions < 3.6.0.0.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
AI Prompt Decorator plugin |
| P229 | warning |
For the hmac-auth plugin, the algorithms field contains the hmac-sha1 value but FIPS-enabled Kong Gateways do not support it. This algorithm is cryptographically weak and should not be used.
|
hmac-sha1 should be removed from the algorithms array.
|
HMAC Auth plugin |
| P230 | warning | For Kong Gateway version >= 3.4.0.0, configuration of rate limiting advanced plugin overrides on consumer groups is deprecated. | Delete any existing rate limiting advanced plugin overrides. Optionally, you may recreate the rate limiting advanced plugin using the consumer group plugin scoping endpoint. | Rate Limiting Advanced plugin |
| P231 | warning |
Plugin ai-prompt-guard is not available in Kong Gateway versions < 3.6.0.0.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
AI Prompt Guard plugin |
| P232 | warning |
For the key-auth plugin, one or more of the following config fields are set: realm but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
Key Auth plugin |
| P233 | warning |
For the basic-auth plugin, one or more of the following config fields are set: realm but Kong Gateway versions < 3.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Basic Auth plugin |
| P234 | warning |
Plugin ai-request-transformer is not available in Kong Gateway versions < 3.6.0.0.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
AI Request Transformer plugin |
| P235 | warning |
Plugin ai-response-transformer is not available in Kong Gateway versions < 3.6.0.0.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
AI Response Transformer plugin |
| P236 | warning |
For the acme plugin, one or more config fields are set but Kong Gateway versions < 3.6.0.0 do not support these fields. The plugin configuration has been updated and these fields have been mapped to their old names: storage_config.redis.server_name => storage_config.redis.ssl_server_name, storage_config.redis.extra_options.namespace => storage_config.redis.namespace, storage_config.redis.extra_options.scan_count => storage_config.redis.scan_count, storage_config.redis.password => storage_config.redis.auth
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
ACME plugin |
| P237 | warning |
For the rate-limiting plugin, one or more config fields are set but Kong Gateway versions < 3.6.0.0 do not support these fields. The plugin configuration has been updated and these fields have been mapped to their old names: redis.port => redis_port, redis.password => redis_password, redis.username => redis_username, redis.ssl => redis_ssl, redis.timeout => redis_timeout, redis.database => redis_database, redis.host => redis_host, redis.ssl_verify => redis_ssl_verify, redis.server_name => redis_server_name
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Rate Limiting plugin |
| P238 | warning |
For the response-ratelimiting plugin, one or more config fields are set but Kong Gateway versions < 3.6.0.0 do not support these fields. The plugin configuration has been updated and these fields have been mapped to their old names: redis.ssl => redis_ssl, redis.ssl_verify => redis_ssl_verify, redis.database => redis_database, redis.host => redis_host, redis.password => redis_password, redis.username => redis_username, redis.server_name => redis_server_name, redis.timeout => redis_timeout, redis.port => redis_port
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
Response Rate Limiting plugin |
| P240 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: propagation but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
OpenTelemetry plugin |
| P241 | warning |
For the zipkin plugin, one or more of the following config fields are set: propagation but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
Zipkin plugin |
| P242 | warning |
For the ai-prompt-guard plugin, regex prompts in the allow_patterns or deny_patterns fields should not exceed 50 characters. Regex prompts that exceed 50 characters are not supported in Kong Gateway versions < 3.7.0.0.Resources that rely on the prompt validation may not function as expected, and this could cause Kong data plane configuration to become out of sync if not resolved.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Prompt Guard plugin |
| P243 | error | For Kong Gateway version < 3.6.0.0, Konnect does not support router_flavor of type expressions. |
Upgrade Kong Gateway to version 3.6.0.0 or above to use expression router. Optionally, you may change the configured routes to not use the expression field for the routes to remain compatible with Kong Gateway versions < 3.6.0.0. The configuration has not been synced to the Data Plane nodes.
|
Routes entity |
| P244 | error | For Kong Gateway version >= 3.6.0.0 and < 3.7.0.0, routes can only be of type expressions, when the router_flavor is configured as expressions. |
Upgrade Kong Gateway to version 3.7.0.0 or above to use both traditional and expression routes. Optionally, you may change the configured routes to not use the expression field to remain compatible with Kong Gateway versions >= 3.6.0.0 and < 3.7.0.0. The configuration has not been synced to the Data Plane nodes.
|
Routes entity |
| P245 | error |
Kong Gateway with traditional/traditional_compatible router_flavor cannot have routes with the expression field in them.
|
Remove routes with expression field or change the gateway’s router_flavor config to expressions (only available on Kong Gateway versions >= 3.6.0.0). The configuration has not been synced to the Data Plane nodes.
|
Routes entity |
| P246 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: response_streaming but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Proxy plugin |
| P250 | warning |
For the route entity, one or more sni values containing prefix or postfix wildcard * characters was detected. This is not supported in Kong gateway versions < 3.7.0.0. Impacted routes are not behaving as expected and the data plane may be inoperable.
|
Remove any sni elements with unsupported wildcard formats, or upgrade to Kong version >= 3.7.0.0.
|
Routes entity |
| P251 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: auth.azure_use_managed_identity, auth.azure_client_id, auth.azure_client_secret, auth.azure_tenant_id but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Proxy plugin |
| P252 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.auth.azure_use_managed_identity, llm.auth.azure_client_id, llm.auth.azure_client_secret, llm.auth.azure_tenant_id but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Request Transformer plugin |
| P253 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.auth.azure_use_managed_identity, llm.auth.azure_client_id, llm.auth.azure_client_secret, llm.auth.azure_tenant_id but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Response Transformer plugin |
| P254 | warning |
For the jwt, the algorithm field has one of the following values set ES512, PS256, PS384, or PS512. Kong Gateway versions < 3.7.0.0 do not support these algorithms.These fields have been removed from the configuration.Features that rely on these algorithms will not work as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
JWT Signer plugin |
| P255 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.upstream_path but Kong Gateway versions < 3.7.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Proxy plugin |
| P256 | warning |
For the ai-proxy plugin, the config field route_type has been set to preserve. This is not supported in Kong Gateway versions < 3.7.0.0. The impacted field has been updated to route_type=llm/v1/chat.
|
Please upgrade Kong Gateway to version 3.7.0.0 or above.
|
AI Proxy plugin |
| P257 | warning |
For the aws-lambda plugin, the config field empty_arrays_mode has been used. This is not supported in Kong Gateway versions older than 3.5.0.7, versions older than 3.6.1.7 for the 3.6.x release line and versions older than 3.7.1.2 for the 3.7.x release line.
|
Please upgrade Kong Gateway to a version that supports this field. | AWS Lambda plugin |
| P258 | warning |
Plugin standard-webhooks is not available in Kong Gateway versions < 3.8.0.0.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Standard Webhooks plugin |
| P259 | warning |
For the ai-proxy plugin, one or more instances are configured with model.provider field set to: gemini but Kong Gateway versions < 3.8.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P260 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: auth.gcp_service_account_json, auth.gcp_use_service_account, model.options.gemini but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P261 | warning |
For the opentelemetry plugin, one or more config fields are set but Kong Gateway versions < 3.8.0.0 do not support these fields. The plugin configuration has been updated and these fields have been mapped to their old names: endpoint => traces_endpoint
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
OpenTelemetry plugin |
| P262 | warning |
For the opentelemetry plugin, the field endpoint has been set but this field has been renamed to traces_endpoint in Kong Gateway versions >= 3.8. To ensure compatibility, the field name has been updated in your config.
|
Rename the field endpoint to traces_endpoint in your config.
|
OpenTelemetry plugin |
| P263 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: logs_endpoint, queue.concurrency_limit but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
OpenTelemetry plugin |
| P264 | warning |
For the ai-request-transformer plugin, one or more instances are configured with llm.model.provider field set to: gemini but Kong Gateway versions < 3.8.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Request Transformer plugin |
| P265 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.auth.gcp_service_account_json, llm.auth.gcp_use_service_account, llm.model.options.gemini but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Request Transformer plugin |
| P266 | warning |
For the ai-response-transformer plugin, one or more instances are configured with llm.model.provider field set to: gemini but Kong Gateway versions < 3.8.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Response Transformer plugin |
| P267 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.auth.gcp_service_account_json, llm.auth.gcp_use_service_account, llm.model.options.gemini but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Response Transformer plugin |
| P268 | warning |
For the ai-prompt-guard plugin, one or more of the following config fields are set: match_all_roles but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Prompt Guard plugin |
| P269 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.input_cost, model.options.output_cost but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P270 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.model.options.input_cost, llm.model.options.output_cost but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Request Transformer plugin |
| P271 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.model.options.input_cost, llm.model.options.output_cost but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Response Transformer plugin |
| P272 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: max_request_body_size but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P273 | warning |
For the ai-prompt-decorator plugin, one or more of the following config fields are set: max_request_body_size but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Prompt Decorator plugin |
| P274 | warning |
For the ai-prompt-guard plugin, one or more of the following config fields are set: max_request_body_size but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Prompt Guard plugin |
| P275 | warning |
For the ai-prompt-template plugin, one or more of the following config fields are set: max_request_body_size but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Prompt Template plugin |
| P276 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: max_request_body_size but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Request Transformer plugin |
| P277 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: max_request_body_size but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Response Transformer plugin |
| P279 | warning |
For the ai-proxy plugin, one or more instances are configured with model.provider field set to: bedrock but Kong Gateway versions < 3.8.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P280 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: auth.aws_access_key_id, auth.aws_secret_access_key, model.options.bedrock but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P281 | warning |
For the ai-request-transformer plugin, one or more instances are configured with llm.model.provider field set to: bedrock but Kong Gateway versions < 3.8.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Request Transformer plugin |
| P282 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.auth.aws_access_key_id, llm.auth.aws_secret_access_key, llm.model.options.bedrock but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Request Transformer plugin |
| P283 | warning |
For the ai-response-transformer plugin, one or more instances are configured with llm.model.provider field set to: bedrock but Kong Gateway versions < 3.8.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Response Transformer plugin |
| P284 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.auth.aws_access_key_id, llm.auth.aws_secret_access_key, llm.model.options.bedrock but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Response Transformer plugin |
| P285 | warning |
For the aws-lambda plugin, the config field aws_sts_endpoint_url has been used. This is not supported in Kong Gateway versions older than 3.4.3.13, versions older than 3.5.0.8 for the 3.5.x release line and versions older than 3.6.1.8 for the 3.6.x release line and versions older than 3.7.1.3 for the 3.7.x release line.
|
Please upgrade Kong Gateway to a version that supports this field. | AWS Lambda plugin |
| P286 | warning |
For the ai-prompt-template plugin, instances have been configured on a specific consumer. This is not supported in Kong Gateway versions < 3.8.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Prompt Template plugin |
| P287 | warning |
For the ai-proxy plugin, instances have been configured on a specific consumer. This is not supported in Kong Gateway versions < 3.8.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P288 | warning |
For the ai-proxy plugin, instances have been configured on a specific service. This is not supported in Kong Gateway versions < 3.8.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P289 | warning |
For the ai-response-transformer plugin, instances have been configured on a specific consumer. This is not supported in Kong Gateway versions < 3.8.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Response Transformer plugin |
| P290 | warning |
For the jwt plugin, one or more of the following config fields are set: realm but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
JWT plugin |
| P291 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model_name_header but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P292 | warning |
For the acl plugin, one or more of the following config fields are set: always_use_authenticated_groups but Kong Gateway versions < 3.6.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.6.0.0 or above.
|
ACL plugin |
| P294 | warning |
For the ldap-auth plugin, one or more of the following config fields are set: realm but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
LDAP Authorization plugin |
| P295 | warning |
For the hmac-auth plugin, one or more of the following config fields are set: realm but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
HMAC Auth plugin |
| P296 | warning |
For the response-transformer plugin, one or more of the following config fields are set: rename.json but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Response Transformer plugin |
| P297 | warning |
For the prometheus plugin, one or more of the following config fields are set: ai_metrics but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Prometheus plugin |
| P299 | warning |
For the http-log plugin, one or more of the following config fields are set: queue.concurrency_limit but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Http Log plugin |
| P300 | warning |
For the statsd plugin, one or more of the following config fields are set: queue.concurrency_limit but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
StatsD plugin |
| P301 | warning |
For the zipkin plugin, one or more of the following config fields are set: queue.concurrency_limit but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Zipkin plugin |
| P302 | warning |
For the datadog plugin, one or more of the following config fields are set: queue.concurrency_limit but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
Datadog plugin |
| P303 | warning |
For the vault entity, the config field sts_endpoint_url has been used. This is not supported in Kong Gateway versions older than 3.4.3.13, versions older than 3.5.0.8 for the 3.5.x release line and versions older than 3.6.1.8 for the 3.6.x release line and versions older than 3.7.1.3 for the 3.7.x release line.
|
Please upgrade Kong Gateway to a version that supports this field. | Vaults entity |
| P304 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: auth.allow_override but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Proxy plugin |
| P305 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: auth.allow_override but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Request Transformer plugin |
| P306 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: auth.allow_override but Kong Gateway versions < 3.8.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.8.0.0 or above.
|
AI Response Transformer plugin |
| P307 | error |
The custom_plugins entity is being used, but Kong Gateway versions < 3.9.0.0 do not support this entity.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
Custom plugins |
| P309 | error | One or more streaming custom plugin entities have been configured, but streaming support is not enabled on the data plane node. Streaming custom plugins have been removed from the config and the data plane may be inoperable. | Enable streaming custom plugin support on the data plane node or remove custom-plugin entities from the config. | Custom Plugin |
| P310 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.model.options.huggingface but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Response Transformer plugin |
| P311 | warning |
For the ai-proxy plugin, one or more instances are configured with model.provider field set to: huggingface but Kong Gateway versions < 3.9.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Proxy plugin |
| P312 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.huggingface but Kong Gateway versions < 3.9.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.9.0.0 or above.
|
AI Proxy plugin |
| P313 | warning |
For the prometheus plugin, one or more of the following config fields are set: wasm_metrics but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Prometheus plugin |
| P314 | warning |
For the cors plugin, one or more of the following config fields are set: allow_origin_absent but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
CORS plugin
|
| P315 | warning |
For the opentelemetry plugin, one or more of the following fields: header_type have been set to one or more of the following values: instana but Kong Gateway versions < 3.10.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
OpenTelemetry plugin |
| P316 | warning |
For the zipkin plugin, one or more of the following fields: header_type have been set to one or more of the following values: instana but Kong Gateway versions < 3.10.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: preserve. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Zipkin plugin |
| P317 | warning |
For the zipkin plugin, one or more of the following fields: default_header_type have been set to one or more of the following values: instana but Kong Gateway versions < 3.10.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: b3. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Zipkin plugin |
| P318 | warning |
For the key-auth plugin, one or more of the following config fields are set: identity_realms but Kong Gateway versions < 3.10.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Key Auth plugin |
| P319 | warning |
For the key entity, one or more of the following schema fields are set: x5t but Kong Gateway versions < 3.10.0.0 do not support these fields.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
Key entity |
| P320 | warning |
For the ai-proxy, ai-response-transformer or ai-request-transformer plugins, aws_role_session_name, aws_sts_endpoint_url or aws_assume_role_arn fields are set in model.options.bedrock. These fields are not supported for Kong gateway versions < 3.10.0.0. The plugin configuration has been changed to remove the unsupported fields.
|
Please upgrade Kong Gateway to version 3.10.0.0 or above.
|
AI Proxy plugin |
| P321 | warning |
For the jwt credential, the algorithm field has been set to one of the following values: ESP256, ESP384, ESP512, ESB256, ESB320, ESB384, ESB512, ES256K, Ed25519, Ed448. This is not supported in Kong Gateway versions < 3.11.0.0. As a result, the credential has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
JWT Signer plugin |
| P322 | error |
For the ai-prompt-decorator plugin, one of the content fields in config.prompts.prepend[] or config.prompts.append[] exceeds 500 characters.Kong Gateway versions < 3.11.0.0 only support values up to 500 characters. As a result, Konnect will not sync the configuration to the data plane node.
|
Update the value of all content fields to contain <= 500 characters or upgrade to Kong Gateway to version 3.11.0.0 or above.
|
AI Prompt Decorator plugin |
| P323 | warning |
For the ai-proxy plugin, the protocol field has been set to one of: ws, wss. This is not supported in Kong Gateway versions < 3.11.0.0. Unsupported protocols have been removed. If no protocols are left, the plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy plugin |
| P325 | warning |
For the aws-lambda plugin, one or more of the following config fields are set: awsgateway_compatible_payload_version but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AWS Lambda plugin |
| P327 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.bedrock.embeddings_normalize but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy plugin |
| P328 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.model.options.bedrock.embeddings_normalize but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Response Transformer plugin |
| P329 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.model.options.bedrock.embeddings_normalize but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Response Transformer plugin |
| P330 | warning |
For the ai-prompt-decorator plugin, one or more of the following fields: llm_format have been set to one or more of the following values: cohere, huggingface but Kong Gateway versions < 3.11.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Prompt Decorator plugin |
| P331 | warning |
For the ai-prompt-guard plugin, one or more of the following fields: llm_format have been set to one or more of the following values: cohere, huggingface but Kong Gateway versions < 3.11.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Prompt Guard plugin |
| P332 | warning |
For the ai-proxy plugin, one or more of the following fields: llm_format have been set to one or more of the following values: cohere, huggingface but Kong Gateway versions < 3.11.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy plugin |
| P333 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: genai_category but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy plugin |
| P334 | warning |
For the ai-prompt-guard plugin, one or more of the following config fields are set: genai_category but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Prompt Guard plugin |
| P335 | warning |
For the ai-proxy plugin, one or more instances are configured with route_type field set to one of: llm/v1/assistants, audio/v1/audio/speech, audio/v1/audio/transcriptions, audio/v1/audio/translations, llm/v1/batches, llm/v1/embeddings, llm/v1/files, image/v1/images/edits, image/v1/images/generations, realtime/v1/realtime, llm/v1/responses but Kong Gateway versions < 3.11.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy plugin |
| P336 | warning |
For the ai-proxy plugin, one or more instances are configured with llm_format set to bedrock/gemini and a route_type set to preserve but Kong Gateway versions < 3.11.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy plugin |
| P337 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.embeddings_dimensions but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy plugin |
| P338 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.model.options.embeddings_dimensions but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Request Transformer plugin |
| P339 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.model.options.embeddings_dimensions but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Request Transformer plugin |
| P340 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.cohere but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Proxy plugin |
| P341 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.model.options.cohere but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Request Transformer plugin |
| P342 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.model.options.cohere but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
AI Request Transformer plugin |
| P343 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.gemini.endpoint_id but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Proxy plugin |
| P344 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: llm.model.options.gemini.endpoint_id but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Proxy plugin |
| P345 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: llm.model.options.gemini.endpoint_id but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
AI Proxy plugin |
| P346 | warning |
For the openid-connect plugin, one or more of the following config fields are set: session_bind but Kong Gateway versions < 3.12.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.12.0.0 or above.
|
OpenID Connect plugin |
| P347 | warning |
For the basic-auth plugin, one or more of the following config fields are set: brute_force_protection but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Basic Auth plugin |
| P349 | warning |
For the ai-proxy-advanced plugin, one or more of the following fields: llm_format have been set to one or more of the following values: anthropic but Kong Gateway versions < 3.13.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| P351 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: access_logs_endpoint but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
OpenTelemetry plugin |
| P352 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: metrics but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
OpenTelemetry plugin |
| P353 | warning |
For the opentelemetry plugin, the protocol field has been set to one of: ws, wss, tcp, tls, udp, tls_passthrough. This is not supported in Kong Gateway versions < 3.13.0.0. Unsupported protocols have been removed. If no protocols are left, the plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
OpenTelemetry plugin |
| P354 | warning |
For the datadog plugin, one or more of the following config fields are set: route_name_tag but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
Datadog plugin |
| P355 | warning |
For the ai-proxy plugin, one or more of the following fields: llm_format have been set to one or more of the following values: anthropic but Kong Gateway versions < 3.13.0.0 do not support these values. Impacted fields have been updated to the following default values in the data plane node: openai. Plugin features that rely on these values may not be working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy plugin |
| P356 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.weight, llm.metadata, llm.description but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Request Transformer plugin |
| P357 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.weight, llm.metadata, llm.description but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Response Transformer plugin |
| P358 | warning |
For the http-log plugin, one or more of the following config fields are set: ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
HTTP Log plugin |
| P359 | warning |
For the tcp-log plugin, one or more of the following config fields are set: ssl_verify but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
TCP Log plugin |
| P360 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: sampling_strategy but Kong Gateway versions < 3.11.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.11.0.0 or above.
|
OpenTelemetry plugin |
| P362 | warning |
For the ai-mcp-proxy plugin, one or more of the following config fields are set: tools[].name but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI MCP Proxy plugin |
| P363 | warning |
For the ai-mcp-proxy plugin, a default_acl block is defined, but Kong Gateway versions < 3.13.0.0 do not support this. The ACL has been removed from this plugin. Because of this, features that rely on these parameters will not work as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI MCP Proxy plugin |
| P364 | warning |
For the ai-mcp-proxy plugin, one or more tools have an acl block defined, but Kong Gateway versions < 3.13.0.0 do not support this. The ACLs have been removed from these tools. Because of this, features that rely on these parameters will not work as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI MCP Proxy plugin |
| P365 | warning |
For the ai-mcp-proxy plugin, one or more of the following config fields are set: logging.log_audits, include_consumer_groups, consumer_identifier but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI MCP Proxy plugin |
| P375 | warning |
For the ai-proxy-advanced plugin, config.balancer.algorithm has been set to least-connections. This is not supported in Kong Gateway versions < 3.13.0.0. The plugin configuration has been changed to `round-robin in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy Advanced plugin |
| P376 | warning |
For the ai-rate-limiting-advanced plugin, one or more instances have been configured with the customCost generic LLM provider. This is not supported in Kong Gateway versions < 3.13.0.0. The plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| P377 | warning |
For the ai-rate-limiting-advanced plugin, one or more of the following config fields are set: custom_cost_count_function but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Rate Limiting Advanced plugin |
| P379 | warning |
For the ai-proxy plugin, one or more instances are configured with route_type field set to one of: video/v1/videos/generations but Kong Gateway versions < 3.13.0.0 do not support this value. The impacted plugin has been removed from the configuration. Because of this, features that rely on these plugins are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy plugin |
| P380 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.dashscope but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy plugin |
| P381 | warning |
For the session plugin, the hash_subject and/or store_metadata fields have been set but these are unsupported in Kong Gateway versions <3.4.3.17 for the 3.4.x series, <3.7.1.5 for the 3.7.x series, <3.8.1.1 for the 3.8.x series, or <3.9.1.0 for the 3.9.x series. The fields have been removed from the configuration.
|
Please upgrade Kong Gateway to version 3.4.3.17 or above for the 3.4.x series, 3.7.1.5 or above for the 3.7.x series, 3.8.1.1 or above for the 3.8.x series, 3.9.1.0 or above for the 3.9.x series or newer than 3.10.0.0.
|
Session plugin |
| P382 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: model.options.bedrock.video_output_s3_uri but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Proxy plugin |
| P383 | warning |
For the opentelemetry plugin, neither traces_endpoint nor logs_endpoint are configured. Since access_logs_endpoint and metrics are not supported in Kong Gateway versions >= 3.8.0.0 and < 3.13.0.0, the plugin would be invalid without at least one valid endpoint. The plugin has been removed from your configuration.
|
Either upgrade to Kong Gateway version >= 3.13.0.0 to use access_logs_endpoint or metrics, or configure traces_endpoint or logs_endpoint in your plugin configuration.
|
OpenTelemetry plugin |
| P384 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.model.options.bedrock.video_output_s3_uri but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Request Transformer plugin |
| P385 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.model.options.bedrock.video_output_s3_uri but Kong Gateway versions < 3.13.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.13.0.0 or above.
|
AI Response Transformer plugin |
| P386 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: metrics.enable_ai_metrics but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenTelemetry plugin |
| P387 | warning |
For the ai-proxy plugin, the route_type is configured to llm/v1/batches for provider anthropic, bedrock, or gemini. Kong Gateway versions >= 3.11.0.0 < 3.14.0.0 do not support batch processing for these providers. The route_type has been changed to llm/v1/chat.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy plugin |
| P388 | warning |
For the aws-lambda plugin, one or more of the following config fields are set: ssl_verify but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AWS Lambda plugin |
| P393 | warning |
For the ai-mcp-oauth2 plugin, one or more of the following config fields are set: token_exchange but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI MCP OAuth2 plugin |
| P397 | warning |
For the ai-proxy plugin, the provider Ollama is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to Llama2 which provides best-effort compatibility with Ollama AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy plugin |
| P398 | warning |
For the ai-proxy-advanced plugin, one or more instance targets are configured with model.provider set to ollama but Kong Gateway versions < 3.14.0.0 do not support this value. The impacted targets have been changed to llama2. Some features of the newer Ollama provider may not work as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| P399 | warning |
For the ai-proxy-advanced plugin, config.embeddings.model.provider has been set to ollama. This is not supported in Kong Gateway versions < 3.14.0.0. The plugin configuration has been changed to config.embeddings.model.provider=openai in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy Advanced plugin |
| P400 | warning |
For the ai-request-transformer plugin, the provider Ollama is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to Llama2 which provides best-effort compatibility with Ollama AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Request Transformer plugin |
| P401 | warning |
For the ai-response-transformer plugin, the provider Ollama is only compatible with Kong versions 3.14.0.0 and above. The provider name has been set to Llama2 which provides best-effort compatibility with Ollama AI models.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Response Transformer plugin |
| P402 | warning |
For the ai-semantic-cache plugin, config.embeddings.model.provider has been set to ollama. This is not supported in Kong Gateway versions < 3.14.0.0. The plugin configuration has been changed to config.embeddings.model.provider=openai in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Semantic Cache plugin |
| P403 | warning |
For the ai-semantic-prompt-guard plugin, config.embeddings.model.provider has been set to ollama. This is not supported in Kong Gateway versions < 3.14.0.0. The plugin configuration has been changed to config.embeddings.model.provider=openai in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Semantic Prompt Guard plugin |
| P404 | warning |
For the ai-semantic-response-guard plugin, config.embeddings.model.provider has been set to ollama. This is not supported in Kong Gateway versions < 3.14.0.0. The plugin configuration has been changed to config.embeddings.model.provider=openai in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Semantic Response Guard plugin |
| P406 | warning |
For the opentelemetry plugin, one or more of the following config fields are set: access_logs but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
OpenTelemetry plugin |
| P407 | error |
For the acl plugin, the protocols field includes one of: ws, wss. This is not supported in Kong Gateway versions < 3.14.0.0. To avoid a security risk, the configuration has not been propagated to the data plane node. Please upgrade the data plane node or remove the unsupported protocols from the plugin configuration.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
ACL plugin |
| P408 | error |
For the acl plugin, the protocols field includes one of: ws, wss. This is not supported in Kong Gateway versions < 3.14.0.0. Unsupported protocols have been removed. If no protocols are left, the plugin has been removed in the data plane node.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
ACL plugin |
| P409 | warning |
For the ai-rag-injector plugin, config.embeddings.model.provider has been set to ollama. This is not supported in Kong Gateway versions < 3.14.0.0. The plugin configuration has been changed to config.embeddings.model.provider=openai in the data plane node (default value).
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI RAG Injector plugin |
| P410 | warning |
For the ai-proxy plugin, one or more of the following config fields are set: auth.gcp_oauth_token_url, auth.gcp_metadata_url but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Proxy plugin |
| P411 | warning |
For the ai-request-transformer plugin, one or more of the following config fields are set: llm.auth.gcp_oauth_token_url, llm.auth.gcp_metadata_url but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Request Transformer plugin |
| P412 | warning |
For the ai-response-transformer plugin, one or more of the following config fields are set: llm.auth.gcp_oauth_token_url, llm.auth.gcp_metadata_url but Kong Gateway versions < 3.14.0.0 do not support these fields. Plugin features that rely on these fields are not working as intended.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
AI Response Transformer plugin |
| P413 | warning |
The basic-auth entity is being used with a SHA256 password hash, but Kong Gateway versions < 3.14.0.0 only support SHA1 passwords.
|
Please upgrade Kong Gateway to version 3.14.0.0 or above.
|
Basic Auth plugin |
| P999 | warning |
For one or more of the following plugins acme, rate-limiting, and response-ratelimiting, instance(s) have been configured with both redis-ce partial(s) and old redis fields. These two sets of redis fields have conflicting values. The old redis fields have been updated with values from the partials in order to satisfy the Kong Gateway payload validation.
|
The old redis fields will be deprecated in Kong 4.0. Please update the configuration to use the new fields. | ACME plugin Rate Limiting plugin Response Rate Limiting plugin |